Backstrap Weaving

This post is about the second expandable folder that I’ve been working on….the weaving, the stitching, the ironing and the gluing. I’m posting all this as much for my own future reference as for the folks who have asked me for an explanation. I have written my notes in my weaving book but there aren’t accompanying photos as there are here. If the process doesn’t interest you, I hope that you will at least enjoy scrolling through and seeing the photos in this post.

The folder is only 99% finished because my box of random buttons that I’ve picked up here and there over the years is now living in Australia. Silly me hadn’t thought far enough ahead to select one or two to bring back to Bolivia with me for this project. I’ve never actually been button hunting here in Santa Cruz. Who knows what I might discover.

What did I learn from this project?…..that the cotton fabric I bought for the stitched shibori project that I planned to combine with my woven cloth shrinks a heck of a lot in the hot dye bath. I had to adjust my overall folder design to accommodate that. I’ll keep that in mind for future projects.

Next came the weaving of the plain-weave side panels. I chose to weave these separately as the wool singles are particularly grabby in plain weave and I need to operate the loom in a certain way to minimize the amount of abrasion. The sheds are much easier to open when I work with warp floats in the pattern area and so I find that it’s an overall smoother and more efficient operation to just weave the plain and patterned areas separately.

The woven pieces were then ready to assemble into one wide piece for the folder.

Just as I had done for the first folder, I joined the three panels using the cross-knit-loop stitch that my Vietnamese backstrap loom teachers use to join panels for skirts and blankets.

I hemmed the completed piece and lined it with my stitched shibori fabric. I also inserted two pieces of stiff card between the woven fabric and the lining….one for each half…..and added a line of sewing across the center of the piece as well, thus keeping the two cardboard pieces separate. I stitch by hand and I love doing this kind of straightforward stitching. At this point I discovered that the amount of stitched shibori fabric that remained was not going to be enough for my original construction plan. Well, we just have to adjust and make it work, don’t we?

The sides of my first folder extend all the way from bottom to top…

In order to fit the full height of the folder I needed 11″ of length for each piece of shibori fabric. I only had enough fabric for 9 1/2″. It’s more than enough to contain the sheets of charting paper that will be housed within the folder so it’s not a big deal…still, I think the side panels look much nicer if they can extend all the way to the top of the folder. It’s hard to believe that the cotton cloth shrank so much in the dye bath. I’m wondering if I perhaps failed to take into account seam allowance when I originally measured out the cloth. I didn’t take notes!

I ironed fusible interfacing onto the reverse of the four stitched shibori pieces and then created the fan folds. This cotton cloth is quite a bit heavier than the fabric that I used on the first folder and I had to coax it into holding nice crisp folds. It really didn’t want to.

And now, this is where it all starts to get a bit fiddly and I’m afraid that my photos aren’t great. I hope that my descriptions don’t sound as clumsy to you as they do to me!

And now, out comes the iron and things get even fiddlier! I have a burn on the inside of my wrist to prove it. The next step is about inserting the cardboard dividers. Here’s a photo of the sides and dividers in position in the finished folder….

I wouldn’t be at all surprised if you come up with a much better way to do this which will have me slapping my forehead, but this worked well for my first folder and I haven’t since been able to come up with another option.

I cut five pieces of stiff card (8″ tall) and twenty 8 x 1 1/2″ strips of heavy fusible interfacing. I ironed about two thirds of the width of each interfacing strip to the two edges of each card, one to the upper face and one to the lower.

My cardboard divider pieces now look like they are edged with an “open jaw” of interfacing ready to clamp down on and enclose something. They need to be ironed onto the fan folds so that they grip the mountain peaks. Yep, that’s the fiddly bit. For the most part it works really well, especially if you manage to keep your body parts out of the way of the iron. I used Wellbond glue for any parts that weren’t quite within reach of the iron. It’s good stuff and works really well. However, I prefer risking the iron to the mess of the glue. Plus the glue requires a much longer “cure” time than the ironed interfacing.

This process will utilize four of the five pieces of card. The fifth gets inserted at the end when you join the two halves of the side panels together. I used the Wellbond glue for this and could then sit back and give it the required amount of time to cure before placing my pile of pattern charts into their new home.

That just about finished off my supply of Petaluma wool. I have some left to use in my next venture into dyeing with cochineal which could well be my next project. I’ll be able to weave a (very) little something with it. If not that, I’ll weave cotton ikat cloth, using my handspun, and make another stitched shibori project for a wallet.

And here’s a reminder that Dorinda is in the States and will be able to mail orders of beautiful cloth and products created by my weaving teacher, Maxima, and the other ladies in the co-op they operate in the central Bolivian highlands. She can do this until December 6. The pieces ae made from the weavers’ own hand-spun and naturally-dyed wool. Take a look at the gorgeous range of colors they are able to create from local dye plants and cochineal. Finished products are available as well as just the cloth on its own for you to use in your own sewing projects. These are snippets of pieces that I have bought over the years.

You can contact Dorinda directly at dkdutcher@hotmail.com or via the PAZA Bolivia blog. I hope you’ll consider making a purchase for yourself or friends for this holiday season. And many thanks to those who have already done so. Dorinda keeps me updated!