woven strap – Backstrap Loom Weaving

Backstrap Weaving – Spinning Tales

I am a “cheap spindler” in much the same way as I am a cheap drunk…it doesn’t take much to make me happy! Don’t waste the good wine on me. I do not have a refined palate. So, it is little wonder that I am content to use my humble Cusco drop spindle when I get the urge to spin. I just don’t have a refined palate for spinning tools.

The Cusco spindle was the second one I ever got, the first being from San Pedro de Atacama in northern Chile. The Cusco one that I got in 1996, being more robust, became my constant travel companion. It was practical. Although I have collected many more spindles on my weaving safaris since then, this Cusco one is the one I always use while the others hang on the wall as souvenirs of places I have been and people I have met.

The very first spinning that I did for weaving on my backstrap loom was with some extremely dry, brittle, and filthy llama fiber that I had bought from a farmer while wandering about the back roads of Uyuni in the Bolivian highlands. I cleaned and prepared it. The dust and dirt would have me wheezing and my skin would crawl and eyes run every time I opened the bags to get more. It made for good spinning training. I gave the fiber a tremendous amount of twist because at that time I believed that this was the only way hand-spun yarn could possibly stand up to the abrasion of warp-faced weaving. I have since learned that this is not so.

**The natural colors of the llama I spun. I was always amazed at how nice it looked when woven. Warp-faced structures are very forgiving in that way.**

**And here, dyed with coca leaves, spearmint leaves and cochineal.**

The first time I was given prepared alpaca to spin by my friend Janet, I decided that I simply couldn’t put all that heavy amount of twist into that beautiful fiber. With a bit of extra care in the way I handled it on my backstrap loom, **it made lovely warp.**

Prior to that experience, I had spun wool while still living in the Chilean Patagonia in the mid 1990s. I had brought some alpaca back from my first trip to Peru but had made a mess of it. That had me turning to sheep. There were sheep galore down there and I was given a fleece. So, I got experience washing and carding it and my first project was knitting! I can hardy believe it as I can barely knit. But I designed a pattern and fumbled my way through knitting the front of a vest. I wove the back panel in balanced plain weave on my Navajo-style vertical loom…without a reed. I probably didn’t even know that reeds existed back then. The knitting yarn was spun on the Cusco drop spindle and the yarn for the weaving on an Ashford Traditional wheel that my boyfriend at the time had brought back from the Falkland Islands. Spinning yarn that worked well for this knitting and weaving was a complete fluke. I really had very little idea about what I was doing.

**Parts of the vest with a triple cross-knit looped edging. The brown part is the woven back. the multi-colored thing on the side is part of a woven bag also edged with the cross-knit looping stitch.**

I really enjoy reading the online group forums about spinners and their spindles. The participants’ love and enthusiasm for their tools is wonderful….I totally get it but I just don’t share it. Some of the spindles they show are beautiful pieces of craftsmanship and I love seeing them. But when it comes down to it, I just want to get the job done.

It seems that when it comes to spinning I am totally product oriented which is kind of strange as it is quite the opposite when I weave. I just want to get this stuff done so I can go weave with it. In weaving I am all about enjoying the process. I probably would not have been willing to devote any time to spinning if not for the pandemic. The combination of needing to keep my hands busy during Zoom sessions as well as a dwindling stash has had me happily spinning up all the wool I could find in my closet. Now I am making a start on the cotton. There’s still some alpaca lurking in there.

And as with my favored Cusco spindle for wool, I have taken the takli that Elizabeth gave me in Australia as my one and only tool for cotton. It is all I feel the need for right now. It makes for quiet, comfortable, and fuss-free Zoom spinning.

**My slow-growing hand-spun cotton stash.**

My collection of spindles that I have gathered in my travels includes a few that are used for cotton. Here are two from Guatemala and one that I bought from my Guaraní teacher here in Santa Cruz. The whorl on that one is a piece cut from the sole of a sandal.

And of course, there is the horizontally-held spindle that is used by my teachers in coastal Ecuador.

The cotton is draped on a wooden stand called the “rueca” for spinning. It has a notch cut into its top which grabs the cotton and allows the spinner to draw out the fibers under tension. A small basket is woven from plantain fiber underneath on which the spindle sits when not in use. This is a miniature version of the rueca which I made with my teachers’ help so that I could take an example back with me to Bolivia. I need to place something in the little basket to weigh it down because it is so small and light. The typical spindle can be seen at right with its wooden whorl. More often now you will see people using yo-yo halves and metal wheels as whorls.

Here are some tiny whorls from coastal Ecuador that the family had found while ploughing their fields. There were close to forty of them sitting in a bowl on a shelf, just like that.

The cotton sliver that I have been spinning was given to me by my friend Betty. One day while breaking off a length from the bundle in the closet to continue spinning, a label fell out which identified it as the Sea Island variety bought from a place called Straw into Gold. Judging from the yellowed state of the label and the fact that it had been typewriter-written, I am guessing that it was bought quite a long time ago. I had been becoming increasingly pleased with my progress spinning cotton but am less so now after having read a little about this variety of cotton online. Apparently it is known for its particularly long staple which makes it one of the easiest varieties to spin. Darn! It seems that I have started at the wrong end of the learning process. Considering how I struggled through the preparation and spinning of that ugly llama fiber all those years ago as well as going to the trouble of washing and carding the fleece I had been given in Chile, it seems like cheating to be picking up this beautifully prepared long-staple cotton as my (almost) first-ever cotton-spinning experience. I wonder if it will feel like going back to square one when I finish this and then start on the other varieties that I have. My very first experience had been in coastal Ecuador where I got to work almost from scratch, de-seeding, teasing apart, and fluffing up the cotton. It was difficult spinning it on the horizontally-held spindles compared to what I do now with the takli. Unfortunately, I didn’t spend much time on it while there, being much more interested in the weaving part of the process. My teachers already had plenty of spun singles that they doubled for warp so that I could learn how they weave their double-pocket saddle bags and hammocks. We would pass time in the evenings on cotton preparation.

I put in a little practice when I got back home but the loom soon called me away…

But now to the present. After finishing my big bag project, I took a few days off to spin cotton and think about what should be next on my loom.

**The finishing touch on the bag project…magnet clasps for the flap and mouth of the bag. I had spare fabric to which I could first attach them.**

I decided that I wasn’t quite done with the three-color pebble yet and that I should weave a study in color transitions. Upgrading my camera strap gave me a product to justify the use of my hand-spun for this study. I dyed some of it a rust color so that I would have three colors that would work well together in all possible arrangements.

**Small quantities of hand spun wool for the camera strap plus some hand spun cotton singles ready to be boiled.**

I got totally absorbed in working on the color transitions and different color alignments and thus forgot that I needed to start weaving the hummingbirds upside down at the half-way point so that they would be the right way up when the strap was worn. Oh well. **That’s what happens when the things that are important for the final product get lost in the process**.

In the picture above, I was testing shapes for the tabs which I would later cut from leather. I have an old home-made leather backstrap that was just the right color and was willing to sacrifice it for this project. I couldn’t get anyone in the street market to sell me just a tiny off-cut of leather and the available colors weren’t quite right in any case. Hand-stitching the leather was fun.

I used the existing strap hardware otherwise I am not sure how on earth I would have attached the strap. There’s a special kind of clip that I have never seen elsewhere that goes through a tiny hole on the side of the camera.

And here I am wearing the strap with its upside-down hummers on one side! and my “Ta-da!” face.

What’s next? I have started a sample for a wool Finnweave cowl. I am using 20/2 wool and need to see if the proportions of the motifs in my weaving with this material match those of the figures on my chart. But first I had to go through that annoying confusion of trying to figure out Finnweave all over again. You make notes from the last project but they are never thorough enough because you stupidly assume that some things are just too obvious to bother writing down. Not so! This time I will get it right and make sure I write down every single detail.

The other purpose of this sample is as a width gauge. This 20/2 wool is a fair bit thicker than the 20/2 cotton that I have been using for Finnweave lately. I have to get used to the difference between the cotton and wool. Cotton, naturally, gives a much sharper image and the hairiness of the wool makes it easier to produce skips in the lower layer of the double weave.

The other project idea that is waiting its turn is a very, very simple double-ikat pattern using my hand-spun cotton. I would hate to waste this lovely Sea Island cotton on a failed double-ikat experiment but I am so curious to see if I can manage to make it work. I will just have to keep reminding myself to keep it simple.