Backstrap Weaving – Percolating

Ikat! I have been giving myself time to allow the abundance of images and information that I keep finding on ikat to slowly filter so that I can focus on the next project. Without this filtering, there is the tendency to want to try everything in the one project. Another thing that is driving that tendency is the fact that my supply of natural-color 60/2 silk is coming to an end. I had used much more than originally planned in the last ikat project. This project was supposed to be a “sample” which for me is typically pretty small. The project turned into something else all together and will end up hanging on a wall.

Here it is after having been pressed good and hard. That always brings out the sheen of the silk but it has been hard to capture it in a photo.

In a way I am being forced to stop and ponder and allow the ideas to percolate because I was surprised to find that the suppliers of alum that I have always used here in Santa Cruz suddenly don’t carry it any more. I had been planning to dye my next ikat project with cochineal and was depending on being able to find alum. I have yet to find a substitute for alum as the mordant. That brought the plans for the next project to a halt.

Getting cochineal here in the lowlands is usually the tricky bit, not the alum. Cochineal is not used for dyeing here but is sold instead by the ladies in the street markets who carry home remedies. They tell me that it is to be taken as a remedy for susto which I can only understand to mean “fright” or perhaps that could be stretched to mean “anxiety”? Finding cochineal was even trickier this time. The massive street market that lies just two blocks from my home was recently “cleaned up”. All the vendors who normally wander the streets or sit on the sidewalk were ordered to move on. This must have included some of the home remedy vendors.

Asking the wrong vendor brought on a cranky almost offended response. It seems to me that this attitude is somehow part of the Highland-versus-Lowland vibe that is quite strong here in lowland Santa Cruz where certain things associated with the highlands, such as the chewing of coca leaves, are rejected as inferior and “indio”. It appeared that only the vendors from the highlands would have cochineal in their home remedy stalls. In any case, you can see that I was successful in finding someone from whom to buy the little dried beetles.

One down, one to go – alum. I was told that the Mennonites use alum when canning their produce so I will be off to the Mennonite market to see if I can find it there. I have not been to that market before and look forward to it. I am told that it is a market of farming implements and supplies for raising livestock etc.

With those two items in hand, I can start to make some experiments. I wonder what kind of red I will get? I will be happy with pretty much anything except  pink. Here’s the color I got with cochineal on my hand spun llama fiber many years ago using an alum pre-mordant. I used it in small double weave, tubular band and complementary-warp pick-up projects.

My challenges for this next ikat project include using a natural dye and tying a much finer pattern. I was lucky to be shown a detailed image of a small section of an ikat textile from Indonesia in which I could actually count the warp threads. I could see that the weaver had tied around groups of six ends to create such a fine and detailed pattern. I could clearly see the three white  warp threads in the woven cloth against the morinda-dyed background. WOW.

I know that the hand spun cotton that weaver was using is most likely thicker than the 60/2 silk I have been using. That makes it hard to make a comparison. In my last piece I tied around sections of fourteen ends in the pattern area and around twenty eight ends where I had created broad bands of resist. I would love to know generally how fine the hand spun cotton used in the Indonesian ikat pieces is in terms of wpi.

The other challenge is creating a new pattern to use with the finer tying. That hasn’t been easy….I have been looking around a lot for ideas and there’s just way too much input!

I have sketched out something very loosely based on leaves. Leaves have become one of my signature patterns and so I figured it would be appropriate to do something with stylized leaves. What I have drawn has ended up being so stylized that it may not be recognizable as leaves, but that’s okay. Whether I can transfer my sketch to the warp remains to be seen.

So far, I have worked with steps of fixed height and width to form the diagonal lines in the patterns, all carefully plotted and measured out. All the angles have been the same. The pattern I have sketched will involve a lot more free-form tying. Oh my goodness, what have I done?! I can often get very carried away creating these challenges right up until the moment I see the warp stretched out before me. Then some hasty adjustments are made. I remind myself every time I think I have become ridiculously over ambitious with this new pattern I have sketched that I did, after all, manage to tie a a couple of fairly nice circles some years ago. Let’s wait and see what happens.

The other benefit of taking time-out is that I have had much more time to spend on the book. I still can’t quite see the end in sight but I have made really good progress. 

Now, I have something wonderful to show from a weaving friend, Emily Robison. I can’t remember exactly how Emily and I connected but she contacted me online and we were able to meet up on one of my trips away and weave double weave bands together. You can see her already weaving a pattern of her own creation at left.

I asked Emily if she would like to write a couple of paragraphs to share with you about her woven work and her experience learning to weave on a backstrap loom in Micronesia  and I will leave the rest of the story for you in her own words….

To my knowledge, the type of weaving that I do is found only in the outer islands of Yap state, in the Federated States of Micronesia — migratory origins unknown. They are a collection of about 16 tiny inhabited low-lying coral islands (possibly all less than one square mile). The culture practiced in the outer islands is very distinct from the main island of Yap — the two cultures have languages of unrelated origins — but they are very intertwined. The islands practice a caste system, and the main island considers outer island people and culture to be either very low caste or other caste, meaning that a main islander wouldn’t go to the homes or eat the food of an outer islander, and main islanders do not weave lava lava.

Photo supplied by Emily Robison of her own non-traditional use of some of the patterning elements she learned with the weavers of the outer islands.

The backstrap woven fabric called lava lava is used in certain patterns as the only form of outer island female dress — a type of wraparound skirt — and in other patterns it is used as part of the traditional male main island dress. It is also used in main islander funeral ceremonies. Therefore it’s an important trade item from the outer islands to the main islands, but main islanders consider it taboo to participate in any part of the manufacture.

Photo supplied by Emily Robison of her current work which she says is a reproduction of one of her teacher’s pieces except for the supplementary-weft pattern.

Traditionally, lava lavas were woven of banana and hibiscus bark fibers and naturally dyed in reds and blacks (maybe other colors, but I haven’t seen them), but this practice has shifted in favor of commercially available thread from China. This transition is less than 50 years old. The traditional fabrics weren’t warp-faced, I don’t think — at least the few I’ve seen weren’t — but today’s lava lavas are.

Silk is too expensive, wool too hot, and cotton doesn’t hold up to the production, so they exclusively used polyester (but I’ve heard rumors of people incorporating more cotton in the past 10 years). Their patterns are pretty distinct and uniform. People can use many colors (reds are off limits unless used as an accent color or on the edges), but the two types of patterns are the lava lavas with large fields of solid color and accents on the edges and in the middle. These are the ones that have a supplemental weft, and an example is the one that I am currently weaving. (Emily tells me that the supplementary-weft patterning technique shows pattern on both faces of the cloth. Here is a view of the back of the cloth of her current piece showing the black supplementary-weft pattern.)

Another example is the style with 6 or 7 contrasting stripes (I don’t know when one would be chosen over the other — 6 is more common) on a colorful background. The stripes are made of two complementary colors and some patterning. 

The ones for men are just black and white, 6 or 7 striped. 

Image of a Yapese man’s lava lava taken by Laverne from the website of worthpoint.com
Single-thread floats in the green section on the upper face of the cloth.

Much to the chagrin of my Yapese host family, I studied with outer islanders and wove in secret for about 18 months. It was a real taboo thing to do and it didn’t make me any friends… so I don’t know as much as I could have learned if I’d been living with an outer island family.

The patterns are made with two sticks that control the floats — one for the right face, and one for the reverse face. The warp is always continuous, and the tension rod loop, string heddles, and pattern floats are all created in the warping process.

(Note from Laverne: I just love that extra heddle peg sitting there so neatly like that. If you are curious about how heddles are made during the warping process, I can show you how my Montagnard (Vietnames hilltribe) backstrap weaving teachers do it. It’s probably not exactly the same way as the Yapese weavers do it but it will give you an idea for now. There’s a video showing how Ju Nie does it embedded in this blog post  followed by a video I made slowing the process down so that you can more easily see how it works.)

Lava lavas must be long enough to cover a woman from upper hips to knees (it is taboo to show off any thigh). and so they are usually about 26 inches wide and 60 inches long. Once cut, the strings of the fringe are kept long to create a kind of modesty curtain between the legs. They’re worn by wrapping them in half around the body, and then pinching the two sides together at the right hip and folding the fringe inward to sit between the legs. They’re usually tied on with a belt, but some ladies just tuck them in.

Emily wearing a lava lava.

You can follow Emily’s work via her Instagram account: @thewovenworld. She is hoping to create a website soon too.

To finish, I have a few things to show you from my online weaving friends….

Kathleen Frtiz recently received a Guatemalan backstrap loom and has taken off on her backstrap weaving adventure as if she had been born for it. This is only her third piece as far as I can tell. It is woven in fine cotton and she is pleased with how surprisingly pliant it is even before it has been wet finished. She used this piece to experiment with patterning with supplementary weft using the patterning sticks and techniques that I describe in this tutorial.

Nancy Ayton made sweet hanging ornaments from her Andean Pebble Weave bands. The deer head motif is her own creation. I love it when people start designing their own patterns. The owl and bird motif is from my Complementary-warp Pattern Book and the knot-work pattern is from More Andean Pebble Weave Patterns.

Nora Dereli is using her inkle loom to weave one of several knot-work patterns that are charted in More Andean Pebble Weave Patterns. This is a motif that  Louise Ström weaves in one of the structures that are woven using tablets. I translated the motif to the Andean Pebble Weave structure.

Susan Bratt finished weaving a guitar strap on her backstrap loom using the Andean Pebble Weave structure. The pattern is from the Complementary-warp Pattern Book.

Wendy Garrity completed what she tells me is her first silk-on-silk wrist band using the supplementary-weft patterning technique known as sampa in Bhutan. The multi-color spots of color that appear between the floats of supplementary weft are so pretty. Wendy studied weaving on a backstrap loom and various traditional patterning techniques while living and working in Bhutan and leads textile tours there every year. Her website is Textile Trails.

Gregory W and I wove double weave bands together and she came up with this lovely band with her own original design shortly after. Her guild had challenged members to use these colors in a project and this was Gregory’s contribution.

 

Marilyn Albright and I have never met but I feel that we are bound to one of these days in her movements between Alaska and Mexico. She has been experimenting with Bedouin al’ouerjan patterns using my tutorials here on this blog and adding her own twist to the traditional pattern .

And here’s one more from Priscilla Bradburn who wove this band after learning Andean Pebble Weave from my book Andean Pebble Weave on Inkle Looms. She has taken flat-top S hooks, hearts, diamonds and other basic shapes and combined them in her own unique way to create a new pattern of her own. This and her creative use of color has produced a beautiful band! 

Let’s hope my hunt for alum is successful otherwise it will be back to the synthetic dyes for me. I wonder what other interesting things I will see at the Mennonite farmers’ market.

Until next time…

 

 

 

 

 

 

 

Backstrap Weaving – Color Challenges

I have finished another ikat project/experiment. This one will be a wall hanging for, most likely, some future home as there isn’t a good space to hang it here. As with most of my weaving projects, I didn’t start out wanting to weave a wall hanging. I simply wanted to continue my experiments in ikat. The experiment was largely successful and so I now get to give the product a name….in this case, a wall hanging.

My goals for this one were to…

…try tying patterns into 60/2 silk. I hadn’t used 60/2 silk for ikat before.

…place one layer of warp threads on top of the other, so that the warp was half its original intended width, and tie the pattern onto both layers at once.

…dye with multiple colors.

…include patterns woven with supplementary weft.

…weave a band along the end of the piece using the fringe of the finished piece as the weft.

The dyeing itself was successful in that there weren’t any leaks or other mishaps. However, none of colors turned out the way I had expected! The first green was way brighter than expected. I thought that it would turn out a lot “dirtier” because I wasn’t dyeing over white. I had hoped that it would look like the typical “swampy” greens that one gets from using plants. Later, I remembered having received some good advice about these particular dyes when I was buying them. I was told that the colors were bright and that it was a good idea to add a tiny bit of slate-color dye to dull them a bit. I even bought a pot of the slate dye so I could do just that and then completely forgot to follow the advice. But, there were some things about the dyeing process that pleased me: as I was dyeing one color on top of another, then on top of yet another, I managed to create an unexpected reddish-brown that I loved. The thing is, I know I will never be able to replicate it!

I thought that I would end up with a black or almost-black background color after all the layering of colors. But, as you can see, it’s a very dark green with interesting shimmers of reddish-brown and teal that appear when light hits it a certain way.

This is a view looking down from my bed first thing in the morning. The warp in this picture has been set up for weaving on a backstrap loom with heddles in place and some weaving started. My bed base is the anchor point for the far end of my loom. I have to be careful if I get up in the darkness not to stumble and get myself entangled in warp!

As weaving progressed and the warp threads jiggled about with the movement of opening and closing sheds, they began to loosen their grip on each other and fan out. The ikat patterns slowly took on a more solid appearance. At this point, I paused to choose a color in my stash of 120/2 silk so that I could weave some motifs into the broad band of reddish-brown. I had a kind of wheat color that I thought would be a good match. Out came the charting paper and I drew a pattern with hooks and arrow-head shapes that would go well with the main ikat pattern. You can also see a thin horizontal stripe of teal lying on top of the one of the wooden rods which I had decided that I hated! So, I designed another fairly solid pattern for continuous supplementary weft to weave over and hopefully conceal it.

Discontinuous and continuous supplementary weft patterns.

This discontinuous pattern was fun to weave. I love this technique where two strands of patterning weft are passed at once. My little cardboard bobbins kept everything orderly. In the lower left part of  the picture with the bobbins, you can just make out the one and only warp thread that broke. I had nicked and weakened it with the tip of my scissors when I was cutting out the ikat tape. It didn’t take long for it to break once I started weaving. Replacing a section of broken thread that has been dyed multiple colors along its length can be a problem. I had some green 60/2 silk that wasn’t a bad match for the dark green but some of it had to creep into the brown section where the warp thread had torn.

The second continuous supplementary-weft pattern that I had designed to cover the teal stripe wasn’t so much fun to weave…at least not to get started. There were 882 warp ends to count in the shed to lay in the first shot of supplementary weft and I had to count it six times before I got it right! I kept ending up with one extra thread. Was I miscounting or had I actually wound 1766 ends of 60/2 silk instead of 1764? It was maddening! Conclusion…I was miscounting. Once the first row was in, it was pretty smooth sailing. I think the pattern does a pretty good job of hiding the stripe.

The threads in the main ikat section behaved pretty well. There wasn’t a great deal of shift except for the very center. I think that had something to do with the way I had lashed the warp to the frame for tying the ikat tape. It has the typical out-of-focus look of ikat.

After that, I had to go through laying in the pattern again for the strip of supplementary weft over the second teal stripe. It was slightly less painful the second time around. And how is this for crazy? I got about 20 rows in on the set of supplementary-weft motifs on the second brown section before I realized I was weaving the wrong pattern! I had designed two patterns. The first had been too fine for this weight of silk but worth keeping for perhaps another project in heavier thread. That was the chart I had grabbed. Grrr! Un-weaving this silk is no fun at all. There is a surprising amount of fluff build-up that binds the threads and means that the sheds don’t want to pop open cleanly to release the weft that you need to remove.. I literally had to tear the threads apart.And here it is finished and still on the loom. I tried to squeeze as much dark green out of it as I could at the end but warp tension was starting to get a bit wonky at that point and it was time to stop.

Once off the loom and after the usual finishing process, I wove a band along the bottom edge of the fabric using groups of warp threads from the fringe as the weft. I designed a double-faced pebble weave pattern that would suit the motifs on the cloth….hooks, diamonds, arrow heads. The piece certainly did not need any more added pattern but weaving a band like this is something I have been wanting to try and this was a good opportunity.

I suppose I shouldn’t have used this piece for my first attempt at this technique but I am quite pleased with the result nevertheless. It takes a while to figure out the number of threads to include in each warp bundle and how hard to beat. If either one of those two factors is not quite right, the fabric will pucker. And mine did a little. My first motif is more elongated than the other two. This is the result of having to adjust my beat as I went along.

I had been admiring ikat fabric from Sumba and had noticed that the weavers there join two panels of ikat cloth together side by side and then weave a band along the two ends of the joined panels using the threads in the fringe as the weft. The vast majority of examples that I have seen so far have been warp-faced plain-weave bands with some warp stripes. It makes me wonder if the weavers recognize that there is already enough pattern in the cloth itself and that the bands, therefore, should be quite plain. This is where I got the idea to weave such a band…but I wanted pattern in mine!

One of the many gifts that Kay Faulkner left to the weaving world was a set of video clips that she had taken while traveling in Indonesia. This will show you the process of weaving one of these bands in Sumba if you are curious….

My Montagnard (Vietnamese hilltribe) weaving teachers taught me to create a twined finish on unwoven warp ends. Like the Sumba weavers, they also join panels together to make their clothing.  A pattern is then twined around the unwoven warp threads on the edge of the combined panels. You can see this at the two ends of a piece I made after studying with these teachers. The Montagnard kteh edging is twined and highly patterned while the Sumba edging is woven and is normally quite plain, as far as I have seen so far. Sometimes a Montagnard weaver will hand over her cloth to a kteh expert who will finish off her woven work with the twined patterns.  Here is a video (unfortunately shot by me in quite low light conditions) of one of my Montagnard teachers twining part of a row with two colors. You can appreciate that it is quite a slow process compared to weaving a band along the edge. I find the movements very calming and graceful. I like the smooth, solid colors this technique produces. The twined band has only one “good” face.

Some day, my latest ikat experiment will find its place on a wall.  This experiment is over, notes have been taken, and it’s time to start thinking about the next project.  I am thinking about using cochineal to dye my next ikat attempt. I have only ever used it to dye llama fiber so far. It will be interesting to see how it goes on silk. Perhaps I’ll make some dye samples this time before I go and dive into the deep end. In the meantime, the unexpected colors that I created in this latest piece have grown on me…good and earthy….as the colors I had expected to get fade from my memory.

And, I continue the challenge of removing all color from my hair.  Let me sneak in an update here of my color-free challenge…18 months in and probably only two more trims to go to be rid of all the old dyed hair!