double weave – Page 16 – Backstrap Loom Weaving

Backstrap Weaving – The ‘Tis-Done and the To-Do

I bought myself a good old fashioned acrylic board last year to write my “To-Do” list and hung it on the bedroom wall. It is not that old fashioned when I remind myself that my teaching colleagues are still using blackboards and chalk where I used to teach English here but it is indeed old fashioned in the world of IPads and such gadgets. I really need to have that To-Do list up there in front of me with a list made in brightly colored marker pens. It is so satisfying erasing something and saying ‘Tis done! What I really wanted to do was start the year with a fresh gleaming clean white board instead of one still covered with colorful scribbled lists.

These two weaving “To-Do”s were still hanging there from 2010 and I am pleased to say that one of them is about to be erased…well almost.

The double weave belt at left went on a nice trip with me to the US recently. It came out once for a weaving demonstration with a group of Bhutanese weavers in North Carolina and then went back into its bag for the rest of the trip. So, I was determined to at least get this off the loom. You may remember that this belt is a result of my twining investigations with Montagnard weavers which led me to Bedouin twining and then Bedouin warp substitution designs which I then decided to reproduce in double weave on this belt…quite a journey!

You can see the Bedouin design piece I wove above right. The warp substitution technique (see the tutorial here) produces crisp designs on a background of solid color with long floats on the back. The same designs can be produced in warp faced double weave (see the tutorial here) without the visible floats and with the patterns reversed on the back of the band. I have all the hardware ready for the belt and just have to put it together now. I need to thread one end of the belt through the buckle which means having to cut a slot in the band. What I usually do is paint the area to be cut with diluted white glue which acts as “stop fray” and then go ahead and cut.

The finished belt, with buckle in place, in the picture has been woven with simple alternating warp floats using a design from a yurt band (see the tutorial here). So, I am just about to erase this 2010 project from the board.

The other unfinished project that you saw photographed above is the sample I made after visiting Guarani weaver Angela. I had just wanted to see if I could get my head around the Moisy technique she was using so, basically, that was a mission accomplished, but I still think that I could make something useful from this piece and don’t feel like discarding it. So, that is next.

Of course I still won’t be able to wipe the board completely clean as it is now filled up with 2011 stuff. And that is the way it should be!

While I was immersed in double weave finishing off my belt, I decided I would make a video showing how to warp for this technique to add to the existing tutorial. Those of you who subscribe to Handwoven may recognize these double weave keyfobs which are shown in the Jan/Feb issue…

This will probably sound completely ridiculous to those of you who are used to winding warps of several yards or meters for multiple projects on your large looms…I wind a tiny warp for each and every keyfob. Warping for double weave and making string heddles across such a narrow warp is such a breeze for me that it doesn’t bother me at all to have to repeat the process for each and every fob. I love the opportunity to play with colors and not have any two fobs the same. I can create a third selvedge for every fob and save time not having to deal with hemming a raw edge which is tricky and often unsightly in double weave. I did weave thirteen identical fobs on an inkle loom once and won’t do that again.

And, as I always say, the only trouble with double weave is deciding which side you prefer…

Decisions, decisons…which side do I prefer? Here are the backs of some of the keyfobs shown above.

The big problem for those learning double weave is that it can be painfully slow. There are a lot of steps and, until you understand why you are making the moves, it all seems like a terrible amount to have to memorize.

It is easy to miss a step and make a mess or lose your way if you have to leave it for a moment…just part of the learning process.

I have been told several different versions of what this little design represents by weavers here in Bolivia and I wrote a little about this here. In any case it is a simple neat design, easy to memorize and fun to weave.

The pattern chart is on the left.

I made several pieces of video covering warping, creating the third selvedge, making string heddles and putting in a second cross to stabilize the shed rod. This week I am trying to just post the warping and third selvedge segments. These videos take so long to upload and my internet connection is not cooperating today. I will add others each week and have them stored on the double weave tutorial page. I hope you find them helpful (once I get them up there).

While on the topic of warping, we have started the Weave Along in the Backstrap Group on Ravelry and, hopefully, participants have read my three little tips from last week’s post particularly the one about the importance of having a good stable set up for warping. Some photos of improvised warping have been posted in the online weaving groups in the meantime…

This is from backstrap weaver Fliegenpilz in Germany, whose idea it was to have this Weave Along in the first place. She has warped for a pebble weave band following the instructions in my book.

Phil has himself nicely set up to weave in his rocker. Check out how he wound his warp with stakes lodged in kitchen drawers.

I caught the next picture in another weaving group on Ravelry…

Pancha says that her idea for warping, pictured above, originally sprang from her desire to try backstrap weaving. She has used it for other looms too but is now fed up with bending and walking up and down and has ordered a warping board.

Other weavers from Weavolution have shared their finished projects with me…

Deanna wove these bands decorated with Andean pebble weave designs on her Leclerc Dorothy 15″ table loom following the draft in my book. She also backstrap weaves and ties up her loom to her 40″ sixteen-shaft Macomber loom…a nice sturdy place to attach a loom bar.

Speaking of which, here is Jennifer’s pebble weave warp tied to the castle of her floor loom…

She has it angled steeply upward which means that she has the warp threads quite close to her for doing pick up and does not need to bend. Each weaver will find their own way. I prefer a gentler angle.

Marsh Knox of PandulaArts has been following the tutorial on simple warps floats and weaves on a Gilmore Mini Wave loom. I have shown many of her finished bands here. Recently she had some of her bands, which she made with alternating floats, sewn into a mini tote bag for a friend…She calls this the “one-skein project” bag.

I had a few things going on this week. Firstly we got a short reprieve from the heat and humidity and were able to turn off the a/c and have the windows open for a whole day. This gave me the chance to boil up the nasty llama bones I have had lying around since my friend Anna brought them to me from the highlands a few months ago. These are the wichuñas, the bone tools used by weavers here to beat in the weft and pick up warp threads for patterning. They are also used in Peru where they are called rukis.

Several boilings and changes of water were needed to get them cleaned up. The smell!! There they are on the right – white and gleaming. The tips could do with a bit of refining but otherwise they are good to go. Several years of use will have them take on the lovely hue of old ivory and I have seen some very old ones that have the tone and shine of polished wood.

That was another 2010 task to gladly erase from the board.

As for the ongoing twining obsession, I started a loom bag project and am twining its strap with letters. Just when I started thinking that I was taking the twining obsession a little too far with this lettering fad, I was shown these fabulous images of Batak twining…The Batak people live in northern Sumatra in the hilly region of Lake Toba.

These amazing textiles are part of the collection of Pamela Cross and she has allowed me to show them to you here on my blog. She describes the above piece as a Toba Batak sadum (a woman’s shoulder cloth). Twined lettering! This twining is so very different to that done by the Jarai and Rhade weavers with whom I studied. How beautiful.

Here are some more images that Pamela shared of the twined bands on other Batak textiles…The following one is a ragi hotang which I understand is a shoulder wrap.

Gasp!

The following is a surisuri. Pamela says that the surisuri is one of three types of indigo-dyed textiles used for Toba Batak rituals.

Here are twined bands from several different types of Batak textiles. The design on the second one from the top is so Andean-looking don’t you think?!

It is exciting to know that there is a book available now by writer/researcher Sandra Niessen, PhD on Batak textiles:

“Legacy in cloth: Batak textiles of Indonesia offers the first definitive study of the woven heritage of the Toba, Simalungun, and Karo Batak.

The most complete analysis of Batak textiles ever published, it provides a record of more than 100 different design types, including archival and contemporary photographs showing how the textiles are woven and how they are used in Batak culture.

Legacy benefits from fieldwork conducted over two decades and consultation of all major European collections of Batak textiles and private collections in Indonesia.”

Even more exciting for me was being able to make contact with Sandra.

She kindly shared some pictures taken by MJA Nashir of a Batak woman twining. The process is not at all like that practiced by my Montagnard friends.

The weft appears to be tensioned between the toes and a small stick seems to be used to aid in the twisting of the two wefts. No doubt Sandra’s book thoroughly discusses the process and I am itching to get the book and have my curiosity satisfied and learn more about the Btak people and their textiles.

Sandra tells wonderful stories on her blog of how she has been returning to the villages where she conducted her research to present copies of her book to the weavers.

Well…after all that eye candy here is the humble twined bag strap I have been making with twined letters.

The idea is to twine the word “weave” in several languages. I have just begun the German version. I hope to do French, Portuguese, Quechua, Aymara, Guarani, Russian, Jarai and many more, if they will fit, with each word in a different font. I would love to hear from blog readers around the world who can tell me how to say “weave” in their language.

The letters are a munched version of those in Linda Hendrickson’s book Please Weave a Message. Remember that Linda’s letters have been designed for card weaving, not twining, and are far prettier than the ones I have used here. Check out Linda’s page to see her gorgeous lettered bands.

So this will be the strap for the loom bag in which I will carry my backstrap on future trips. The shape will be based on the camera tripod bag which I have been using until now. I haven’t put much thought yet into the body of the bag but I will weave it on my backstrap loom using a heavy-ish black mercerized cotton and some of my new Tahki Cotton Classic thread for patterns and embellishments.

And continuing on the lettering theme, weaving friend and blog visitor Sharon Kersten completed the chart of letters for the Montagnard warp float lettering tutorial that I did last week and has sent it to me to pass on to all of you. She saw my photo below of various bag straps woven with letters and used it to chart what she thinks the missing letters could look like as well as the numbers. Many thanks!

I will leave you here for this week with this new Bolivian beverage…

Peru has its Inka Kola and now we have”Coca Colla”! It’s a play on words, not bad spelling…”colla” being the word to describe people of indigenous origins here in Bolivia (pronounced coya- the oy sounds like the oy in “boy”). It is made with coca leaf extract, is heavy in caffeine and slightly carbonated. All I can say is that…weeeel…. it tastes as good as it looks. 😉 Cheers!

Backstrap Weaving – In my own backyard.

IN MY OWN BACKYARD

My weaving explorations seem to be taking me further and further afield these days…outside my city, my country (Bolivia) and even outside the continent and I have found myself visiting SE Asian weavers in the USA and learning about weavers in the Middle East from books.

Sometimes I forget about the treasures that are here right in my own backyard.

I wrote about the Ayoreo people who live in this area and their looped bags in a post a couple of weeks ago and the difficulties I have had in winning their trust so that I could learn more about them and their crafts. I have given up on that for now but hope that I can pursue it again some day. In the same way I was reminded of a Guarani weaver with whom I made contact here over six years ago.

angela and hammock loom — I used to visit Angela, a Guarani weaver, every Saturday morning over a period of a couple of months about six years ago. She had her loom set up in a handcraft store and was warping to make a hammock.

It was such an opportunity to meet up with Angela like this as it is very difficult to find weavers right here in the city let alone a weaver who has a loom and a place in which to use it . Angela’s hometown of Isoso is about twelve hours drive away from here. Angela would weave in the store twice a week. On my Saturday visits I got to see her warp most of the loom, but missed seeing her setting up the heddles. I saw her start the weaving and part of the designs. The white cotton hammock had three bands of green, yellow and black pick up designs. Angela’s motifs included flowers, geometrics, pineapple plants and scenes of people in their typical daily routine.

angela 4 — The motifs are hard to see on my scanned photos. On the right you may be able to make out two ladies “machucando”, that is, pounding plaintains, in order to make “masaco”, a typical Santa Cruz snack.

I would ask Angela where she lived hoping that I could maybe visit her at home and have some lessons. She had told me that she had a small loom in her house. She would stretch out her arm and say “leeeejos” (“lejos” means far) as if to discourage me from visiting. Unfortunately, her son fell ill before we could really bond and she stopped coming to the store. Eventually the loom disappeared and now even the store is closed. I did manage to give her a copy of the photo of herself and her baby boy before I lost touch with her.

After Angela’s disappearance, I found bits and pieces about Guarani weaving in books and found that the technique she was using to weave her hammock is called Moisy. They also use a pebble weave which in the Guarani language is called Karapepo. I bought a hammock and bag in the Karapepo technique

OLYMPUS DIGITAL CAMERA — I was able to copy the deigns from the hammock using Andean pebble weave technique and make this guitar strap.

From books I learned that the earth and the cosmos are represented by the star and snake skin designs. These are pretty much the only designs you will see woven in the pebbled Karapepo technique. In the Moisy technique, however, the weavers have a far greater repertoire and the designs are not like any others that you will see any where else in Bolivia. They speak of the lush tropical fruitiness of Santa Cruz! Leaves, flowers, vines, butterflies, animals and people involved in their daily routines or dancing and celebrating carnival are depicted on the hammocks, wall hangings and bags.

angelas cell phone pouches — Cell phone pouches made with the Moisy technique with flower and butterfly motifs. A band of horizontal bars serves as the strap and velcro has been sewn on as a closure. A black band was woven and sewn simultaneously to the edges using the weft as the sewing thread to give a very nice neat finish.

And here is the best part of the story…I bought the above cell phone pouches from Angela last weekend at her home. Yes, I found her again, was invited to her home and got to spend the afternoon with her looking at her looms and weaving. The little fellow pictured with her above is now 8 years old and she has since had another son – that makes five sons in all now! Her eldest is married with his own family.

How did I find her? Very much by chance. The English institute where I taught English for eleven years started offering classes in the Guarani language shortly after I left. I recently noticed the loom and weaving pictured at left in the library which had been made and placed there to celebrate the start of the new Guarani program. I asked the receptionists about it they showed me the lovely cell phone pouches that a Guarani weaver had sold them. Fortunately, they had the weaver’s number and it turned out to be none other than Angela.

One of the karapepo cellphone pouches that Angela made for the receptionists – quite a different style to the blue and black ones she made using the Moisy technique.

I was very keen to see how Angela sets up and weaves her pebble weave as well as to learn how to do the Moisy. I was pleased to see that she uses the very same crochet cotton to weave as I do. When I visited her last Saturday, she had just warped up to make a colorful wall hanging on the smaller of her two looms, had just finished a book bag for a university student and was also in the middle of weaving a belt with fighting roosters which had been ordered by a Brazilian business man who mounts the woven pieces on leather and then apparently sells them for a very good price in Brazil. Angela’s enormous hammock loom is there in her patio and she can warp up several small projects on it at a time. She seems to have enough orders to keep her very busy.

She showed us one of her hammocks, the finished book bag, her cell phone pouches, greeting cards depicting carnival celebrations in her hometown of Isoso, pillow covers, belts and purses.

angelas looms — At left, the smaller loom warped for a wall hanging in Moisy technique and at right Angela is warping a narrow band to show me how she sets up for Karapepo technique.

She stretches a cord across the loom around which the start and end loops of the warp dovetail. Except for when she is weaving a hammock, she usually creates a third selvedge by starting her weaving right at the dovetail string.

I filmed her warping, making heddles and weaving the Moisy technique. As usual when I have the camera in front of my face. I find it hard to really absorb what is going on and so I had to come home and watch the movies over and over before I could grasp completely what she had been doing.

I like the way she makes her string heddles chaining them together. You will see her doing this in the video.

She, on the other hand, loved my heddles on their sticks (I had taken my backstrap loom, which she found very amusing, with a double weave piece on it to show her) and so I taught her my way of making heddles.

Here are two short clips of Angela warping using the dovetail string and making heddles. As she makes the heddles she is explaining to me the meaning of the designs on my guitar strap and telling me about the snake skin and how the snake that taught the first Guarani woman to weave in a dream is also embodied in the Parapeti River. Her little boys can be heard chattering in the background in the Guarani language.

In the next video, she is weaving the belt with the fighting roosters in Moisy technique. She has three sets of string heddles and another shed above the cross string. You must see the way she does her pick up. It is quite unique!

The lower of the three string heddles holds a shed through which she simply passes the weft without having to do any pick-up. The two upper heddles hold the separated colors. She pulls on those two heddles working her way from left to right to pick out the colors she needs. Watch her left hand gathering up the selected warps. Her eyes are down at the weaving line watching the design so she knows which colors to pick. Then she opens the shed which the lower string heddle controls. Then she does another row of pick up before opening the shed above the cross string, through which she can pass the weft without having to pick up warps. This shed is a little difficult to open as the warps have become entangled in the string heddles.

So I had to go home and see if I could figure out the Moisy! The best way was to try and reproduce one of her woven motifs. I found that I had to pull the weft really tightly through the shed to have my design look like hers. It makes a very, very sturdy fabric. For those of you who have my Andean Pebble Weave book, I would compare it to the thickness you achieve when you use the three-shed border. In fact, I quickly realized that the three-shed border is the very same structure.

There is my attempt to reproduce the flower on the cell phone pouch. It really helped a lot knowing that we both use the same thread so I knew what width to expect right from the start. I really had to pull the weft tight and force it into that width.

The motif is not exactly the same but I understand the technique.

I tried to chart it and then found my chart was wrong and so ended up just reading it directly off the cell phone pouch which was a really good exercise.

I did notice that Angela is weaving the rooster belt a lot more loosely. .

I confess that, although I started out with my warp set up as Angela showed me with the three string heddles, I found it quite uncomfortable simply because it was so foreign to me…impatient!… and so I changed to another set-up after a while with which I felt more at home. I would like to try Angela’s pick-up technique on her vertical loom and hope to visit her again soon. She has invited me to come and see her floral designs on the colorful wall hanging she is making.

In the meantime I will work on my charting as I would like to make a collection of these uniquely Cruceño designs.

###################################

What else have I been up to?

Well I started my double-weave belt using the Bedouin designs that I wove into my wall hanging.

I seem to be gathering a collection of black belts. At least they are all in different techniques with designs from different cultures. The uppermost one is two-color alternating warp floats (my made-up name for it…we could use the Kyrgyz word “terme” for it). The center one is the yet-to-be-finished double woven example with Bedouin designs and the lower one is, as you must all know by now, Andean pebble weave as taught to me by weavers from Ayacucho, Peru.

I have also been weft twining but using floats this time to make a textured design in one color which is inspired by the alpargatas worked in ply-split darning that I showed you last week.

I am totally unimpressed with the results so far!

I’ll keep at it. Who knows, it may look better as I progress. Maybe I should overlap the floats by two warps instead of just one. What do you think?

What have my online weaving buddies been up to?

Anna, who is cycling down to Tierra del Fuego has turned up in Salta, Argentina and has added braiding to her skills following my instructions for the Margarita braid.

This is one of the two braids that was taught to me by my sling-making teacher in Peru.

I usually advise people to start with the Palma braid first as a skills builder but she jumped right in and, as you can see, has done really well!

I have gathered up all the information on the Palma and Margarita braids that is embedded in various posts here on my blog and put it all together on one page here.

Zacarias in Yanque Peru taught me these two braids which are used to make the typical slings of the area.

Marsha Knox of Pandula Arts Creations has been playing with simple warp floats in two-color alternating pairs on her Gilmore Wave loom and has created some great designs of her own. More designs like these can be seen on the Guatemalan belt in this post.

Lisa has been up to her eyeballs in dyeing but took some time out to enjoy a night in her yurt. You will probably recognize the band encircling the yurt that she was lucky enough to purchase at a reenactment event and which I have shown off many times here on my blog. It is woven in the “terme” technique.

######################################

Finally…you may remember my posting a video some time ago, which had been made in March this year, showing little Melina learning to spin cotton from her aunt in coastal Ecuador. This is the family with whom I stayed in 2007 and learned about the process of weaving cotton saddlebags and the simple warp float technique. I accompanied anthropologist Kathleen Klumpp on this trip and Kathleen has just returned from another trip there with a new video of Melina’s improved skills seven months down the track.

Kathleen tells me that Melina is not yet able to support the weight of the spindle and so rests it on her thigh.

The original video of Melina’s first steps can be seen here. How quickly she has picked up the skills! Aunt Trini and Grandma Luz are master spinners and she is lucky to have such skilled teachers but I think that Melina’s success is largely due to Kathleen’s encouragement. How wonderful too that Kathleen has made and shared these videos so we can all follow this story.

And I have been inspired by a very sweet recent comment from Graciela here on the blog. I don’t know where she is from but she has inspired me to get my act together and put up the tutorials translated into Spanish that I have been promising. Another task for this weekend and I will try try try not to get distracted!

Pssst! There’s a Spotlight article about my backstrap weaving in the latest issue of Handwoven…

Backstrap Weaving – Spreading the Obsession:warp faced and weft twined

SAM_0836 — Simple warp floats in red and black by Eladio Salas Torres

WARP FACED AND WEFT TWINED

Three things have influenced the weaving I have been doing this week and they are spread across three very different parts of the world:

– a new book in my collection of weaving books on Bedouin weaving which has taken me on a fascinating trip through Saudi Arabia and other lands inhabited by the Arabian Bedouin with their colorful woven tent dividers, bags and camel adornments;

– the intricate weft twined work that the Montagnard weavers of Vietnam, that I met in the US, incorporate on the edges of their warp faced textiles;

– the beautiful combination of red and black in the backstrap woven piece by Eladio Salas of Mexico that I showed you last week.

First I took a step backwards as I had decided that I didn’t like the weft twined piece that I was practicing on last week. Fortunately I discovered that un-twining is a lot easier and faster than un-weaving. It is just a sample piece for skills-building but I just was not happy with the colors and motifs I had chosen and it had to go! Half of it got pulled apart and I did some searching on the net to figure out how I would like to continue. So now I am continuing with a swirl design from a Jarai tribal textile and will finish it off with other Montagnard motifs.

Meanwhile the Bedouin designs were calling to me…fabulous red, white and black warp faced pieces interspersed with bands of weft twining. I noticed that there was a small three color band of design that was common to many of the pieces which Joy Totah Hilden identifies as al-‘uwairjan pick up patterning and so I decided to sample that before launching into a big project.

In Hilden’s book I see that Bedouin weavers use staked out horizontal ground looms with their heddle bar suspended on forked sticks, rested on top of oil cans, cement blocks or other such objects or tied to sticks driven into the ground. The weaving is suspended just a few inches above the ground. As the weaving progresses, the work is not rolled up. Instead, the weaver sits on the completed work and inches her way along the warp to stay close to the weaving line. Weaving is even done inside the home with the loom bars and warp held under tension in ingenious ways. One picture shows the loom bar tied to another bar which has been lodged behind a doorway.

Images of Bedouin textiles and looms can be seen here and here.

Here was my chance to put the reds and black together and learn some traditional Bedouin designs. The main panel of my weaving is done in a technique which I believe is called warp substitution. This pick up technique creates long floats on the back of the textile. I have never been a fan of long floats and much prefer double faced weaving but I wanted to use the technique employed by the Bedouin. To eliminate the floats I could have woven the very same designs in double weave.

The center panel of my piece is woven with the warp substitution technique called “shajarah” (tree) pick up patterning.

This weaving also gave me the opportunity to try weft twining on the loom. Many of the pieces shown in Hilden’s book have not only weft twined edges but also several bands of twining at various stages within the weaving. I have been enjoying my off-loom twining experiments and was looking forward to comparing them with twining on warps under tension on a loom.

I have kept these first attempts at on-loom weft twining narrow and simple.

I had to consider how many warps to use in a bundle around which to twine the wefts as well as the right thickness of weft yarn so that the warps didn’t get spread too much thus widening the piece. Should I twine loosely or tightly? It took a few attempts to get it right. The warps did get spread slightly and so I had to work to get them back into place so I could continue with the warp faced weaving.

I plan to leave the weft ends on as a decorative feature. This piece will be a wall hanging. I was thinking about using it as part of a pillow cover but my cat, no doubt, will chew those weft ends off.

Feeling a bit more confident, I did a slightly wider weft twined band at what will be the center of the piece and added in a little bit of chaining.

It is lovely doing the weft twining on the loom and the added control that one has by having the warps under uniform tension allowed me to use a much finer yarn than I have been using on the off-loom pieces. I expect with more practice I will eventually be able to do fine off-loom twining too….some time in the distant future!

The motifs in the warp substitution band have been copied from images in Hilden’s book and from those I have found online.

You can see the bands of al-‘uwairjan pick up on the sides.

I am now just over half way through this piece and hope to finish it with a wider and more complex piece of weft twining.

I will add to the weft ends that are hanging from the sides to balance both sides and perhaps add some tassels.

Hopefully it will be ready to show next week.

There are many beautiful weft twined camel adornments in gorgeous red, tan and mustard tones that I would like to use as inspiration in other pieces.

While we are in red-and-black mode….

I promised you last week some more information on the lettering used by the Montagnard weavers in their bag straps.

Anyone who knows how to do simple warp floats as detailed in my tutorial here will pick this up in no time. The lettering is done in simple warp float technique with some variation.

In simple warp float technique you are using a shed of each color, for example, all the red warps in one shed and all the whites in the other. You weave alternating red and white horizontal bars and then go floating one of the colors over the other to form your designs.

The difference in the Montagnard method is that they have one shed of red and another shed of alternating red and white which you can see at left (with a two-warp red border).

In the red and white shed, they drop all the whites which exposes their black weft – you can see black dots on the above lettered band. They use twenty-nine warps in each shed to weave their letters, that is, twenty-nine reds in one shed and fifteen whites alternating with fourteen reds in the other.

When they want to weave a letter, they…

-open the shed with the reds and whites and drop all the whites except the ones that they need to form the letter.

-pass the weft.

-save those whites and add them to the red shed.

-pass the weft.

–open the red and white shed again and keep the same whites from the previous weft pass along with the whites needed to form the next part of the letter.

-drop all the other whites.

-pass the weft.

-save only the whites needed for the next part of the letter and add them to the red shed.

– pass the weft.

AND SO ON……

This will be double dutch to those of you who have never done simple warp floats. Well what are you waiting for? Here’s the tutorial! Become familiar with the simple warp float technique first and then try the letters.

NOTE:

If you use a red weft instead of black you will create the impression of a smooth solid color background.
This is not a double faced technique.
This technique does not produce the stiff band typical of true warp faced weaves.

####################################

There was a question in the Inkle Weaving group on Ravelry about doing one-weft double weave on an inkle loom and so I warped up my Ashford inklette and have added some pictures to the one-weft double weave tutorial for this. I only warped up to take the pictures and wove a triangle as a sample. This morning I had some time to play around with the warp…

This is very easy to do on the inkle loom. One-weft double weave produces a thick band with sharp motifs on a solid background. It is double faced.

Flipping the loom upside down, this is what you see…

This is the first time I have tried this on the inkle loom. Weavers in the Backstrap Group at Weavolution have tried it but warned me that it is a bit stressful on the loom. I wasn’t sure if my inklette would be able to take it but I actually don’t find it stresses the loom at all.

You will warp your loom normally except that you will be using doubled threads.

See the full tutorial with all the details and more pictures here.

######################################

You may remember my blog post about Anna who came to visit and learn backstrap weaving with me here in Bolivia. She and boyfriend Alistair are on their way by bicycle to Ushuaia after having started in Alaska in May 2008.

Well they have just completed the Lagunas trail in the salt lake area of Bolivia and Chile and are currently luxuriating in San Pedro de Atacama, Chile. Anna described that riding section (which turned out to be more of a pushing section for the last five days…deep sand and a strong headwind) as one of the most physically demanding things she has ever undertaken.

Anna and Alistair teamed up with a couple of German cyclists for this part of the trip and Anna has been spreading the obsession by teaching new friend Carolin to backstrap weave. They are carrying printed pages from my Andean Pebble Weave download with them.

Here are some fun pictures of them weaving on the road…

2. uyuni, first weaving class — Anna on the left gave the first weaving class to Carolin in the town of Uyuni in Bolivia before heading off on the lagunas trip. The little table has been fashioned from "madera de cacto" (wood from the dead pillar cactus)

5. idem — Carolin with her tiny loom tied to her bike and weaving on the salt lake.

10 bike double weave back side — Anna designed a fitting motif with which to practice her newly acquired double weave skills.

13. idem — Anna warping in camp somewhere in the desert. She said her fingers nearly froze off! I recognize those pencils...

So nice to see my apprentice so enjoying her new skills! Apparently Carolin will be doing a long sailing trip after this bike journey so we can expect to see the backstrap loom being used in the middle of the ocean some time in the future!

Anna brought me some spindles and llama bone picks from Sucre.

I gave her very precise directions to the curandera stalls in the crazy campesino market which sell llama fiber, weaving tools and all kinds of home remedies.

She not only found the curandera area but I believe she bought the things at the very same stall at which I shopped when I was there.

I have sent some of the spindles to the Netherlands and the US and have one left if anyone is interested. I have a few llama bones left too.

Drop me a line if you are interested. 🙂

Backstrap Weaving – Building skills and resources.

BUILDING SKILLS AND RESOURCES

I have been busy behind the scenes building the resource pages on this blog. I am about three quarters of the way to finishing the “Frequently Asked Questions” pages which will deal with fifteen or so topics related to making your own backstrap loom and weaving on it.

You can access the index by clicking on the FAQ INDEX tab on the header image. There you will find links to the finished pages or you can go directly to each page by clicking on one of the topics on the sidebar.

The pages include explanations with photos, links and images. I hope that you find them useful and please feel free to ask any questions, add information from your own experience or suggest other topics by leaving me a comment here on the blog or the relevant FAQ page.

And….I will be translating all the tutorials to Spanish and putting those on new pages too. (Y….voy a traducir todos los tutoriales a español y los voy a poner en paginas nuevas también).

So, that was my keyboard activity for this week along with writing an article and getting some pages done for my next book!

As for 0n-the-loom activity, I was asked to weave some bookmarks for a friend. I was told what design to use but the colors were left to me. I got to use some more of the Turkish cotton that I bought recently and I can’t say enough about how beautiful it is to weave with. It is only for special projects, though, definitely not for sampling as it is a bit pricey. Details can be found on the FAQ 3 page which answers the question “What yarns are suitable for backstrap weaving?”

These have been woven in double weave. As the borders are plain weave I used two wefts. One weft wove the borders and upper layer of the double weave and the other wove the lower layer. Lettering is really easy to do in double weave and although these letters I invented are very basic, they can be very effective. I have charted them out for you all to use. Most of the letters are in the following two images and I am sure that you can invent the ones that are missing. You can, of course, weave the letters after following my tutorial for one weft double weave.

Other woven messages can be done in the Montagnard style lettering. I learned this warp float weave by studying a band I bought from some Montagnard weavers that I met in the US on a recent visit.

This is a “looser” weave and the resulting band is quite flexible unlike the double weave which is very firm.

Next week I will do a tutorial on this warp float lettering.

You have probably heard me mention before my love of the letters that Linda Hendrickson has charted in her book Please Weave a Message.

I got this book hoping that I would be able to use the charts for double weave but found that the “stitches” produced in card weaving sit one on top of the other as opposed to those in double weave that are staggered from left to right. This meant that I would have to adapt Linda’s charts for double weave. I did adapt many of the letters but they were seriously altered and just did not look as nice as Linda’s but now I have had an idea!

I realize now, after my recent experiments with weft twining, that weft twined “stitches” also sit one on the top of the other and that I should, therefore, be able to use Linda’s charts to twine letters and messages. I am not sure how much the slant on the weft twined stitches will affect the appearance of the letters but I can’t wait to try it out.

I haven’t done so yet as I am still building my weft twining skills while working on another project this week with slightly finer yarn.

This time I am using three and sometimes four colors at a time and it is a little cumbersome but I do like the results. The design has been inspired by pieces in a book on Bedouin weaving. From a distance this looks pretty much like a piece of tapestry. Many things amuse me about this technique….firstly, it is something new, secondly, it helps me to better understand what the Montagnard weavers are doing at the edges of their warp-faced weavings and thirdly, it is an off loom technique that does not require tools apart from one’s own hands.

I am grateful to Bonnie Datta who told me that a chapter of Peter Collingwood’s book The Techniques of Rug Weaving is devoted to twining…both warp and weft. The book can be downloaded for free here. The opening line of the chapter reads….Twining is not weaving,… so that settles that debate!

It shows some ways to turn the wefts at the edges for rug making which I must try as that is something with which I am still battling. The piece that I am working on now is still a “skills builder” but, who knows, I might be able to make something useful out of it.

As far as lettering goes, my boyfriend’s mother asked me a long time ago to make something for her. She is from Cochabamba in the Bolivian highlands and, although she was raised speaking Spanish, both her mother and grandparents were bilingual, speaking both Spanish and Quechua. She told me that there are three lines that comprise the “Law of the Qechua” which go…

which translate to… Don’t steal; Don’t lie; Don’t be lazy. She would like me to weave these words into a wall hanging for her. Well, I might not weave them, I might twine them.

What I am really leading up to with my twining experiments is weaving a double weave piece on my backstrap loom with twined edges where the design on the twined edge matches the double weave motifs. There is much skill-building to be done before that point. Hmm…I am not sure if I am less adventurous now or wiser. I am sure that in years gone by I would have launched myself straight into this and not bothered with the “skill-building”!

In the meantime I have been admiring some ikat pieces from Sumba which I found online which have very broad twined edges. They leave the wefts tails hanging out at the sides as fringe. I am trying to hide the weft ends so I can have smooth neat edges, without much success, I might add!

This has led me to look at other twisty twined off loom techniques and especially one that is practiced right here in Santa Cruz where I live by the Ayoreo people. Actually, I have always wanted to learn about this but gave up some time ago trying to find a willing teacher. Maybe it is time to try again.

Information about the Ayoreo people is sketchy. Population estimates in different sources range from seventeen hundred to four thousand Ayoreo people, distributed amongst seven to ten clans living in the area known as the Chaco. They use off loom netting, twining and knotting techniques, sometimes with the aid of a needle, to make a type of shoulder bag called utebetai using a fiber called garabatá fino from the Bromelia Hieronymil plant. The fiber is twisted by rolling it on the thigh using ashes to take away some of its stickiness. It is plied and may be also dyed before use.

I have three of these bags but have opened them out to use as wall hangings.

According to a booklet put out by CANOB (Central Ayorea Nativa del Oriente Boliviano), the designs used in the pieces represent seven clans. The motifs include representations of the patterns on armadillo shells, clouds, snake skins and the eyes of a jaguar.

Miniature pieces are also made which are said to be used to carry talismans.

Even if I don’t make something like this myself, I would like to sit down with the ladies and watch the process and document it. Sometimes they are seen working with the fiber in the street but unfortunately I have not found them very open to my questioning or hanging about in the past.

The Ayoreo also use weft twining to make bags and carve beautifully simple bowls.

My friend Kathleen sent me pictures some time ago of bags called chácaras, which are said to be of Mayan origin, being made in Panama by the Ngöbe and Buglé people. The fiber is from the Aechmea magdalenae plant and is also twisted by rolling on the leg. The netting method appears to be the same although their color palette is quite different.

To finish this week I have some projects to show you from Marsha Knox who is in the Backstrap Weaving Group at Weavolution and Eladio Salas Torres who lives in Mexico and follows my blog.

Marsha used a tapestry loom to weave a band patterned with simple warp floats. I know that Marsha had a few false starts with this but she persevered and I thank her for showing us how warp faced bands can be woven on a tapestry loom.

Eladio has woven a wide piece incorporating three strips of simple warp floats using patterns from my blog. The red and black together look stunning!

He is using the double bird design from coastal Ecuador and a hook design that I adapted. He also sent me a picture of himself at his loom. I LOVE getting photos like this!

It looks like he is using a cardboard roll for his shed rod and maybe pvc pipe or wood for his loom bar and roll up stick. I wish I could sit cross legged like that! He has just bought my pebble weave book and I am sure we are going to be seeing pebble weave bands from him soon.

NEWS AND STUFF…

Here is the link to the most recent Synergo Arts newsletter about their latest progress with the ergonomic bench in Guatemala.

Backstrap Weaving – In pursuit of all things pebbly

A wee milestone to mark today: One year since the publication of my very first weaving article – BACKSTRAP BASICS in WeaveZine. I am hoping that this is the kind of article that will never look “dated”! Backstrap weaving is, afterall, an ancient practice and the project I presented in the article, a backstrap, is not exactly a fashion accessory! I hope that people will continue to find it useful for many years to come.

A million thanks to all those who have used the article and shared pictures of their woven backtraps with me. Some have been content with that one backstrap weaving experience while others have gone on to learn more and have created lovely pick up bands. I have made new online friends through that article and even gotten to travel and meet them. It really is a personal milestone worth marking.

This all comes on the very day that Syne Mitchell, editor of WeaveZine, has announced the details of her exciting new steps onward in the world of publishing.

I have had a couple more articles out since then in the WARP newsletter and Shuttle, Spindle and Dyepot and am working on some things at the moment as deadlines approach which means that this week’s post is a bit shorter than usual. My fingers have been a little bit busier at the keyboard than at the loom these last days but, of course, there was time for weaving (I would go mad if there wasn’t!)

Last weekend I decided to launch into another pebble weave project. You may remember that I showed you some images in a previous post of belts woven by the Tarahumara orRaramuri (he who walks well) people of Mexico…

The belt above in the lower right corner belongs to my friend Annie MacHale. She was wearing it one day at Convergence. The others belong to anthropologist Martha Graham. This was another of those chance meetings. She was at Convergence too and stopped by the Weavolution stand where I was displaying my backstrap woven pieces including some of my pebble weave work. She returned the following day with some of her Tarahumara belts to show me and allowed me to photograph them.

The zig zag design with its adjacent triangles reminded me very much of designs in the weavings of the Guarani people here in lowland Bolivia where I live (pictured at left). The Guarani design is said to represent patterns on snake skins. There are motifs on both the Guarani and Tarahumara pieces that resemble stars. According to an article in National Geographic (November 2008 ) “Each star in the night sky is a Tarahumara Indian whose souls – men have three and women have four, as they are the producers of new life – have all, finally, been extinguished.”

I am, of course, only guessing that the motifs on the Tarahumara weavings are, in fact, meant to be stars. I haven’t been able to turn up much information online about the weavings but am in the process of purchasing an article from the Journal of Anthropological Research. The National Geographic article has a picture of men in ritual costume where you can just catch a glimpse of the woven belts under brightly colored cloth that they also wrap about their waists. I also found images of a women weaving on horizontal wooden frames which they hold on their laps while resting the other end on a rock. There does not appear to be any kind of tensioning device on the loom.

I found an image of a woven belt that I particularly liked which had been collected in the 1890s and set about charting it. When you see the design you will understand that after about an hour of this I was not only seeing squares when I shut my eyes from the charting paper but also swirling spirals!

These belts, from what I have seen, are generally 2 – 3 1/2 meters in length but I warped up on one of my shorter warping boards to sample.

Normally, I would weave something like this as a sample and, if I liked it, would then plan a project in which I could incorporate it. Not in this case! Weaving this was hard work!! The spirals went this way and that and I found it impossible to leave the chart and just weave. Just as I got accustomed to weaving spirals in one direction, they would change course so it was a very slow process and I decided that this effort must be put to some use. Fortunately I had a piece of black woven fabric that had been left over from another warp and the band looked pretty good on top of that.

And here is the end result…(as if you hadn’t already guessed! just love sewing in those zippers!)

Having the band separate from the body of the bag allowed me to play around a bit with the placement of the pattern and I decided that it looked nicest off to one side. I have found other Tarahumara bands with unusual designs so I will get down to charting those so that I can incorporate the designs in larger projects.

Here’s the long band which started out on Lisa’s four-shaft floor loom and then came home with me to go onto the backstrap loom to be finished. I was hoping to make this into a guitar strap for a friend in Utah. However, it seems that the standard strap hardware does not come any wider than two inches so I have kind of dropped that idea. Roger didn’t know that he was about to get a guitar strap and he doesn’t read my blog so sshhh! we won’t tell him. Now I am thinking “loom bag”.

This is my current nifty loom bag, my tripod case. It is perfect with a zippered top and shoulder strap. It is just the right length for a loom and some tool bags and my backstrap. My portable warping board fits in there too but, maybe after all these years, I really need a woven loom bag and I have this one as a model. So I need to weave some plain fabric onto which I will sew my green band or maybe the band could be the sides. I just can’t seem to figure what color fabric would look good with that band.

Ah, so many new projects to get into and I continue to gather up information slowly but surely on past investigations like the woven belts used by the Russian Old Believers. Bits and pieces of information fall into my hands often sparked off by a random comment in a conversation with someone. I love how these things happen!

Here is something that popped into my inbox the other day…

A friend of mine who was out and about snapped a couple of pictures of ladies in their typical highland felt hats with some interesting hatbands.

You can see that the one at left definitely has a pebbly surface but I strongly suspect that these are factory produced bands. I would so love to talk to this lady and find out more about her hat band. If it is, in fact, factory made I am wondering if there is a growing trend to buying bands now rather than hand weaving them. I had always found the hatbands to be one of the most individual of woven pieces with widths and designs varying greatly.

The other band above has a series of single woven motifs each separated by braids which is kind of interesting. I can’t get a close enough look to see what kind of weaving it is but it is certainly not the supplementary weft work which is usually used to decorate hat bands here.

hatbands a — These are the more typical hatbands woven with very fine ground warp thread and decorated with supplementary wefts

More hatbands with their colorful supplementary wefts above. You can see in the top example that the weaver used different weight threads. The red is heavier than the blue and gives better coverage. They key to success in this technique is to find the right weight ratio between your ground warp and main weft and the supplementary weft. Many of these designs are created using very long floats which could be a problem on an item that was destined to be handled a lot. The floats would catch on things. On a hatband this is not such a problem.

You can see that sometimes the supplementary weft creates the motif and other times it is used to fill in the negative space.

A tutorial on this technique (pictured above) can be seen on my blog here.

Here are some pictures from online companions who have been following my tutorials…

Heidai from Norway wove this band in one-weft double weave for the school bell with the school’s name included. She used four-strand braids to finish it.

Amineko72 in France is weaving a band from my Andean Pebble Weave book using her inkle loom. If you would like to try this on your inkle loom too, I recommend heading to the Inkle Loom Weavers group on Ravelry where there are a few people working on this together at the moment. Look for the Andean Pebble Weave thread. There is also a larger group working together on another thread called Pick-up using various books to make nice pick-up bands on their inkle looms. They have a very nice helpful community going there.

I just spotted Evelyn Oldroyd’s post on her blog showing one of the large pebble weave designs in my book on her inkle loom. She has made a very interesting warp with a comb design on the edges of the pebble pattern and the colors are gorgeous! I wish I could have posted the picture here but I haven’t gotten her permission yet as I just spied the post. Check it out on her blog.

And now… back to my pebbly pursuits!