backstrap looms – Page 5 – Backstrap Loom Weaving

Backstrap Weaving – Something from Scraps

I was motivated by the announcement that the summer 2019 weave-along (WAL) in one of the weaving groups on Ravelry would be “Weaving with Hand-dyed or Painted Yarns”. The WAL for the last couple of summers has been about band weaving and although I happily participated in those, this newest topic is much more interesting and challenging for me.

I decided that it was a good time to try ikat using silk for warp and started scratching around in my silk stash which includes cones and skeins of 30/2, 60/2 and 140/2 thread. I figured I would be wise to start with the heaviest 30/2 thread even though that still seemed very intimidating. I have mostly used cotton for my ikat experiments in the past, the finest being this one with 20/2s.

I was able to turn this experiment into something useful…a nice draw-string bag for my Kindle…

I had been using cold water dyes for these cotton experiments. Now was the time to take out the lovely Landscape and Jacquard brand dyes that I had bought a few years ago in the hope of dyeing wool and silk for some of my projects. I had all I needed: the ikat tape, the right dyes and a selection of silk from which to choose, but I still hesitated.

Ikat projects are such a big undertaking. There’s all the time spent designing and then tying a pattern, not to mention all the measuring and care to make sure that the pattern gets tied on straight. My eyes always seem to to tell me something completely different to what the ruler is indicating. Then you can never really be sure if you have wrapped the yarn well or tightly enough. There’s always a chance the dye will seep into the wrapped yarn and spoil the motif. And, finally, even if the initial tying and dyeing stages have been successful, you can never know just how much the threads will shift on the loom to possibly blur the pattern out of recognition.

The fineness of my silk in my stash was intimidating. So, I was quite relieved to discover in my scratching around that I still had scraps of naturally dyed silk left over from other projects. This silk is much heavier and seemed like it would be much more manageable for my very first ikat experiments with silk. I had been offered all these tiny dyed skeins of silk by a guild when the guild member who had created them had passed away. No one else had seen a use for them, but I knew that I could use them for small projects on my backstrap loom. This was what I was able to bring back home with me to Bolivia….

You may remember that some time ago I used them to weave four pieces which became covers for journals…

These are the remaining scraps I found in my closet…

Ikat Cat by Budi Satria Kwan fineartamerica.com

There are two quite different kinds of silk rolled up in these tiny balls. I opted for the heavier of the two for my ikat project and decided to wind a crazy multi-colored warp. I wanted to weave a piece that would cover a journal that I had left over from the other project. The warp only needed to be nineteen inches long to give me enough fabric for the cover as well as a comfortable amount of working space on my backstrap loom.

I was inspired by a picture of some fabric I had seen on the internet many years ago of the silhouette of a multi-color cat sitting on a dark background. I had saved it and kept it in the back of my mind. I wasn’t feeling brave enough to go for such an ambitious shape right now and decided to stick with some basic straight lines for this experiment. I had done some experiments with creating curved shapes in ikat some years ago too. They were quite successful but would have been even better if I had remembered to account for take-up when I tied the shapes. My circles had come out a little flattened!

I really liked the simple idea of having the multi-colored shape appearing on the black background.

Here’s the warp I created.

Next, I extended the warp on a frame so that I could start tying in the design. A friend lent me a small table that made a perfect frame for this.

Those light pieces of thread you can see in the picture are enclosing the sections of threads that will be tied. Most bundles were made up of twelve ends with a few evenly distributed ones that held fourteen ends so that I could cover the total of 270 ends across the width of the warp.

I wrapped the thread in ikat tape in several short sessions over three days. The frequent breaks are necessary as I tend to get sloppy with my measurements when I get tired.

Here you can see the warp off the frame and ready to be soaked before going into the dye pot.

Here it is after being rinsed and left to dry overnight…

And now on the backstrap loom, heddles in place, first section unwrapped and with weaving underway…

Rather than remove all the ikat wraps at once, I like to slowly unwrap as the weaving progresses. I feel that leaving some of the wraps in place helps reduce the amount of shift in the threads which gives a crisper design. I know that the shifting and blurring can be attractive but I have found that it is less so when the motifs have blunt horizontal edges as mine do. Shifting in motifs like these can sometimes create spots and/or lines of color that are totally disconnected from the main motif. The practice of not removing all the ties at once gives me a relatively small space in which to weave and operate the loom. I use fine swords and wrap my weft around a stick rather than the regular shaped shuttle that I prefer. I can slide the stick with the weft into a very small shed. I keep weaving until I absolutely can’t continue due to the lack of space and then I remove the next ikat ties to free up some space to continue.

Almost there…

I am hoping that I have planned this well enough so that the black squares in the middle of the center row of three motifs sit right in the middle of the spine of the journal.

Done!…

I am very pleased (and relieved!).

Ikat projects are always a big unknown for me. They can end up being a mess or a success. I’ll call this one a success.

It does seems a bit weird over-dyeing naturally dyed silk with chemical dye, but there really wasn’t a whole lot more I could do with the scraps of silk that were left in my closet except perhaps make some wrist cuffs. I already made the cuff you can see at left when I was sampling for the first set of book covers.

I am glad that this project still shows off the beauty of the natural dye colors.

There is probably enough of the other kind of silk that I was given to do some further ikat experiments. It is finer and slicker. Maybe I will make an ikat cuff or two. The more experience the better if I am ever to move on to my finer 30/2s and 60/2s silk thread!

I could have produced a very similar effect in warp-faced double weave without all the mess and risk. I was thinking about that. Double weave would have given me a thicker fabric for a start, which I didn’t want. Plus the two layers of cloth would not have connected in the areas of solid black. That can sometimes create a sort of ballooning effect between the areas where the layers are in fact connected. In any case, the more ikat I do the more confident I will feel about eventually reaching my goal of creating complex curved shapes…the kinds I wouldn’t be able to achieve in double weave or the other patterning structures that I use.

Now all that remains to be done is to look for some pretty paper to use on the inside of the front and back covers of the journal.

Between bouts of ikat wrapping, I started sewing together strips of the green cloth from my Karen backstrap loom project to make a table square that will be approximately twenty-five inches square. It will be another piece on which I can display my samples at my workshops. I’ll show you my progress on that in the next post.

And, this will be my last chance to remind you to make sure you have downloaded all your purchases from Patternfish. You have until the end of the month to do so.

Backstrap Weaving – Order and Disorder

It all started a few years ago when my weaving friend Bhakti gave me a loom with a circular warp that she had been using to study with a group of Karen backstrap weavers. Her teachers had created the warp and set it up for her. It seems that they used the sticks that they would normally use for their much wider projects. The coil rod, heddle sticks and shed rod were clumsily long for this narrow warp. Because I was traveling, the first thing I did was leave behind the large piece of long pvc pipe that they had been using as the shed rod. It was way too bulky to pack. I saved the space it had been occupying with a sturdy piece of cord.

I loved the simple backstrap made from a piece of plastic Thai rice sack. A halved stick of bamboo fills the seam at the two sides so that the strap doesn’t fold in on itself. The sword was also wonderful as was the forked dowel rod that had been neatly split in two. The unwoven warp, and later the cloth itself, get clamped between the two pieces of that split rod and then rolled with the help of another rod to hold the circular warp in place. This stops the warp from slipping around the two end beams as the weaver beats. It was too precious a piece to leave behind even though it was heavy and bulky. The simple temple, which consisted of a flat stick with pins taped to ends, was also a treasure.

In case you are not familiar with what I mean by a circular warp, compare the two warps in this next picture….

The warp with the blue and yellow pattern is circular. You start weaving at one point and continue around the circle until you arrive back at the place where you started. The entire warp slides and rotates around its two end beams every time you advance the warp. This means that the weaver always stays more or less seated at the same distance from the end of the warp throughout the project.

The other warp is the one that I more typically use…a single-plane warp. You start weaving at one end and finish at the other end. The cloth is rolled up as the weaving advances. The weaver, therefore, moves closer and closer to the end beam as the weaving advances.

I learned about the use of circular warps on backstrap looms with the Montagnard (Vietnamese hilltribe) backstrap weavers with whom I studied some years ago and have used this kind of warp a few times in my own work. It is particularly handy when I want to weave a piece that is too long to fit in my weaving space on a single-plane set-up, like the purple scarf project below….

Here’s another long warp that I set up in circular fashion as a demonstration piece…

Above, you can clearly see the circular nature of the warp my Montagnard teacher, Ju Nie, is using.

One thing I have struggled with a little when using a circular warp is getting the warp well clamped and fixed in position in order to start the weaving. My aim has always been to clamp the warp so that I can start weaving as close to all the knots (where I changed colors in the warp) as possible. This creates the smallest amount of loom waste. This has always involved a lot of fiddling and messing about, for me in my inexperience, with the threads slipping and sliding in their circle around the two end beams so that the knots eventually got very much misaligned. My warp that had come off the warping stakes in such good order would end up in complete disorder! Eventually I would get it clamped but there would be much more waste than I had anticipated because the knots had slipped so much out of alignment. Part of the problem is that I didn’t insert the coil rod while winding the warp. A coil rod in a circular warp has a very useful stabilizing effect even before you can actually start weaving.

I noticed that the Karen weavers set up their warp in a slightly different way which keeps the color changes in the warp perfectly aligned and in good order no matter how much messing about you do. They use two coil rods….one in the typical position beyond the shed rod and the other is positioned at the point in the warp where one would start weaving. This second one creates even more stability and locks everything at the color changes into position.

This is the way I would go about winding a warp if I wanted to replicate the set-up of the Karen warp I was given…

Of course, I can’t say that this is the way they did it themselves.

The two blackened circles are the two fixed stakes that hold the warp tension. Ca = the coil rod at the ”start” of the warp. Cb = the coil rod in its typical position beyond the shed rod. The stakes marked X hold the cross. I know that the Karen weavers use a hollow rod of large girth (H) to measure the length of the heddles that they create while they wind the warp. Later, a stick of much smaller girth is inserted in the tube. The tube is slid out from beneath the heddles and the thinner stick remains behind as the heddle rod.

I could see from examining the Ca coil rod in my Karen warp that the first and last ends of warp were tied directly to the rod. At a color change, the tail of the old color would be left on standby until it was later called into use again. The new color would be tied to the rod. It all looks a bit disorderly there in the picture below but, wow, what a difference it makes to getting the warp nicely clamped and positioned so that the start of the weaving can be as orderly as possible!

I placed a stiff cardboard strip in one of the sheds at the coil rod which gave me a nice straight and even base against which to beat and started weaving from there.

In the very first picture I showed of the warp you may have noticed that there were two shuttles. The warp had been set up for some continuous patterning with supplementary-weft. The green weft was used for the ground weave and the white weft was the supplemental patterning thread. The warp included two patterning rods that raised certain warp threads in order to form the simple repeating pattern. These were placed in the same way that my Guatemalan weaving teachers had shown me.

I wasn’t really in love with the pattern and I also didn’t care for the fact that the ground weave was more warp-dominant than warp-faced so, once I had decided that I was going to actually sit and weave this piece (about three years after having received it!), I removed the patterning sticks and un-wove the six inches or so of cloth that had been started.

I used a thick piece of dowel to replace the pvc shed rod that I had removed. And then I put sticks in the original cross to get an idea of how wide this warp would be if I wove it as warp-faced rather than warp-dominant.

I am in the habit of first weaving a sample with new-to-me yarn before taking on a major project like this so that I know exactly what width to expect. That wasn’t an option this time. By putting in cross sticks and gently sliding them back and forth along the warp until everything settles, I can then push the threads around and get a pretty good idea of the where these threads will want to sit in my hands when I am in the driver’s seat. It’s worth noting that ten different weavers could work on this warp and all create different widths of good warp-faced cloth. The threads will behave in different ways with different weavers at the loom according to how how much tension each places on the wrap, how they beat and how they handle the weft. Something that was a little unusual for me was the fact that the warp was made up of doubled threads.

The first thing I had to come to terms with was the lack of order in the green strips. I am a bit nutty when it comes to symmetry. The green strips were all different widths. Well, the fact is that I didn’t come to terms with it and I cut and pulled out ends so that the two outer strips matched. I then made the two inner ones match too. They were slightly wider than the two outer ones. One white stripe was missing a couple of ends but I decided I would live with that!

ABOVE: In “jammies” on a wintry day trying to decide what to do about those uneven green bits!

From order to disorder….I then decided that the little supplementary-weft patterns that I planned to use, needed to be scattered randomly along the length of the piece. I don’t do random very well and every time I try, I find myself unconsciously slipping back into a pattern. I pushed ahead trying to be as little controlled by a need for symmetry and orderly patterning as I could.

There was plenty of warp to work with and so I decided the first part would just be about seeing if I had set the width correctly. Then I would decide on the motifs I would use, the material for the supplementary weft and the colors. The warp didn’t come with enough weft material to weave the complete project and so I used some white thread I have in my stash. You can see the turns of the white weft along the edges. A bit later I discovered that I did in fact have some green in my stash that almost perfectly matched the warp color.

Below you can see the fun moment when the ”starting coil rod” rounds the far beam and starts heading towards you rather than away from you. You finally get to catch just a glimpse of what you have woven so far….

The warp is in good order which is more than can be said about the contents of my cupboard!

And getting closer….and then closer….

In the picture above left you can see that I am using a shed rod attached with rubber bands to a second stick. These two form the system that I call the ”twisty sticks” and twisting them is what helps me to open a nice clean heddle shed without having the scrape the heddles along the warp. This way of operating the loom is one I learned from a backstrap weaver in Peru and is just one of many methods that I have seen backstrap weavers use.

In the picture on the right, you can see the flat stick (it’s actually a shuttle that I am re-purposing) that I kept permanently positioned in the ”back” shed at the shed rod. I would pull it down towards the heddle and then tilt it on its side to raise and clear that shed through the heddles. Then I would leave it lying flat once again within the shed when it wasn’t in use.

Getting veeeeery close….The two coil rods and the shed rod (I am using a two-stick shed rod aka ”twisty sticks”) are now so close together that if I wish to continue, I’ll need to change the large shed rod to a much slimmer one, which is what I did. With that, I was able to squeeze in another couple of inches.

And, this is where I called it quits….

All sticks have been removed and you can see the unwoven warp that connects the start of the woven cloth to the end. What a mess that is!

And here is the cloth straight off the loom….

One idea I have is to lay pieces of the cloth side by side, joining them with decorative stitching, and make a bag of some sort. I will let the cloth lie around for a while and see what other ideas come along.

Here are the simple sticks that went into this project from top to bottom…

far beam,

forked split rod (these are the ones that came with the warp but I ended up using the pair below them which I had bought from another backstrap weaver from Burma. They are much lighter in weight.),

shuttle (I didn’t use the stick shuttle that came with the warp as I am not fond of that kind of shuttle),

sword/beater (this is an old favorite of mine from back in 1995. It was originally a very long shuttle for my Navajo loom which was cut down and beveled to become a simple sword…love it!),

shed rod,

heddle rod and second heddle -”protection” rod,

starter coil rod (Ca)….interesting how it ended up a bit bowed!,

coil rod (Cb),

second shed stick which together with the shed rod formed the ”twisty sticks”.

Oh, and there was a second rod (not pictured) that was used together with the split rod to roll and secure the near end of the warp. I didn’t feel any need for a temple.

One other thing worth mentioning is that I have a new appreciation for the way my Guatemalan weaving teachers taught me to enclose the warp threads in heddles. This is the same method that the Karen weavers use and is also used by Yan, who brought her Li-style backstrap loom to show me, and Ju Nie my Montagnard teacher. I’ll expand on this in another post after I have done some experiments.

In the meantime, I must write to Bhakti and show her what became of her wonderful gift!

Backstrap Weaving – The View from the Driver’s Seat

Twice during my recent trip away I got to sit in the ”driver’s seat” to experience what a weaver from another culture sees as they sit at their backstrap loom gazing down the length of their warp.

First, I got to spend the day with Yan Zhang, a woman from mainland China who went to study with backstrap weavers of the Li minority group who live on Hainan Island, China. She kindly brought her loom and warping frame and we, along with my good friend Deanna, talked about all things backstrappy for a good part of the day. You may remember Yan from a previous post of mine in which I embedded a beautiful video that she made of herself warping and weaving with her teacher on Hainan Island. I had also written about a loom and patterning process from Hainan Island when I crossed paths with Megan in this post. some time ago.

Unrolling the warp and feeling excited as the beautiful cloth and tools are revealed.

Soaking up everything Yan has to tell me about the process…and hoping that I might have a chance to try!

Here’s my view as I sit at Yan’s foot-tensioned loom with its circular warp. While I have woven many a time using my big toe to tension my warp, this was the first time I had had the opportunity to sit at one of these awesome foot-tensioned backstrap looms. Yan’s legs are shorter than mine which meant that we needed to unroll the woven cloth from the beam and adjust length. We didn’t take the time to get it quite right and, as a result, I didn’t have the full range of movement in my feet that was necessary to be able to operate the loom comfortably. Nevertheless I got to use the loom and throw some shots of weft and it was thrilling!

The pattern structure is what I call ”simple warp-floats”. Floats form the patterns on one face of the cloth but not on the other. The loom was set up to create all the pattern sheds with heddle rods and other sticks in place and so no pick-up was required. I loved having my feet be part of the loom. I loved the feeling of curling my toes around the beams. Of course it requires lots of practice to make just the right amount of tension adjustments with movements of the feet. Quite often, I moved my feet too much and had the far beam slide down off the balls of my feet.

Look at Yan’s feet flexed toward her so that she can relax tension enough on the warp to enable her to raise a heddled shed. She is adding the threads that are held on her pattern stick to the main heddled shed.

The tools that Yan used were all beautiful in their simplicity. She told us that some weavers on Hainan Island have introduced materials such as pvc pipe and I often see these also being used in the highlands here in Bolivia and Peru. Yan’s tools are all natural traditional materials.

Like backstrap weavers in many regions around the world, the shuttle is a simple stick. I love the shape the yarn takes as it is wound onto the shuttle and Yan showed us how the Li weavers create that. Look at that gorgeous sword on the floor! The heddle rods are doubled pieces of bamboo and weavers look long and hard to find bamboo that grows in such a way. Once found, these pieces very much cherished. They are formed when a thin off-shoot of bamboo grows parallel to a piece of larger girth. The larger piece holds the heddles while the thinner piece closes around them and secures them. Yan does not use a temple. When I asked her about that, she indicated that the coil rod is what is used to help maintain consistent width.

When we asked Yan about the thread she was using we all had a chuckle when she said it came from the craft chain store Joann! My Vietnamese weaving friends in the USA were never quite comfortable with the thread that they bought locally. Whenever a family member traveled back to Vietnam they were asked to bring back thread.

Yan showed us her handwoven skirt fabric and the way it is wrapped and pleated to fit the user.

Yan also learned how to spin cotton with her Li teachers and showed us a beautiful piece that she has woven using her own hand spun cotton. Here it is removed from the loom still in its uncut circle…

One of the other many fascinating things for me was the frame that Li weavers use to measure their warps. The loom can be set up anywhere and held between the body and the feet. In the same way, the warp can be measured anywhere on a simple hand-held device!

The particular warping path shown in my photo is what Yan calls ”four point” and creates the shortest possible warp. She showed me how to wind this shortest warp for what she says might be used to make a scarf. We separated the colors at the cross sticks in much the same way I was taught to do using my four warping stakes. The heddles are only made once the warp is off the frame and on the beams. However, the threads are turned in such a way as the warp is wound on the frame to allow the immediate insertion of the coil rod when the warp is removed. You can see the way the warp threads wrap around the upper right corner of the frame.

I shared some of my weaving with Yan and we compared warp-float techniques as well as the techniques used to create patterns using supplementary weft. She liked my wrist band with my leaf pattern in supplementary weft and I was happy that she accepted it as a gift. Here she is wearing it while warping.

She showed us some fabric that was woven by her teacher which is considered particularly precious because it is embedded with slivers of mica. You can see one sliver glinting in the light in the next picture. Follow that column down and you will clearly see the pieces of mica sitting under the red warp threads.

It was an absolute delight meeting and weaving with Yan. It was just a few months ago that I first saw her beautiful video on Youtube. I am grateful to my friend Deanna for opening up her home for this visit. Deanna is my backstrap weaving buddy and she of course was just as interested to meet Yan and spend the day with her.

A week or so later, I got to sit in the driver’s seat at another backstrap loom, this time from Guatemala. Susan had been to Guatemala and bought a loom with a couple of yards of cotton cloth already woven and wound onto its beam. She asked me to give her some tips on how to operate the loom so that she could finish off the weaving.

Single-layer warps are used in Guatemala rather than the circular ones that the Li weavers use. This one is made up of lively cotton stripes. Two colors have been used to create horizontal bars on one half of the warp. There is even some variegated thread in use on one edge. Variegated thread was also used to make the colorful heddles. Susan did not know for what this piece of cloth was intended but I think the sturdy cotton fabric could be made into tote bags.

Unlike the Li weavers, Guatemalan weavers use a simple temple which is made up of a length of bamboo with open ends that spans the width of the cloth and two small nails. The piece of bamboo sits below the fabric. The nails are pushed through the edges of the fabric from top to bottom and then turned into the open ends of the bamboo.

The loom came with a good ol’ hefty sword…not as smooth and polished with use as the sword Yan was using but it certainly does its job in propping open the sheds and beating the weft firmly into place. I used the two cross sticks that are typical in Guatemalan backstrap looms as ”twisty sticks” to help raise the heddle shed.

One thing I found particularly interesting was the way the weaver had settled the far end of her warp. This is the second time I have seen this. My Guatemalan teachers taught me to start out by weaving an inch or so at the far end of the loom before turning it around and starting from the other end. The inch of weaving at the far end locks the two layers of threads together around the far beam and also sets the width at the far end of the loom. I noticed that the weaver who was using the loom that Susan bought had simply placed a metal rod in the second cross, lodged it up against the far beam and firmly lashed it into place. This is a quicker and far less fiddly way of achieving the same result, although perhaps not quite as pretty!

Yes, I had a very nice time sitting in the driver’s seat of these two looms and am so grateful for these opportunities. I think both Yan and I show it in our faces…the joy of weaving on a backstrap loom! The wonder of “being the loom”!

Right now, I am happily weaving on a 180-inch-long narrow warp, creating the straps for my blue pocket bag. I bought the wool yarn I needed to finish the project while I was away. It’s just a plain blue strap in the sturdy intermesh structure and it is a nice way to get back into the loom with an easy task which gives me head space to plan out my next project while I weave. I will get to use my shoulder bag with its quirky pocket on my next trip away in late July.

Oh, and if you happen to subscribe to Spin Off magazine, the summer issue has an article by Devin Helman to which I was excited to be invited to contribute.

You will also see Sara Lamb’s contribution to Devin’s article, Honest Cloth, as well as words of spinning wisdom from Kristin Merritt whose work I often show here on my blog.

And…here’s the ten-month grey hair update.

DON’T FORGET: While Patternfish sales will cease on May 31st, you still have until June 30 to download and save your purchases to a safe place. I’ll be announcing the new home for my ebooks in my next post.

Backstrap Weaving – Woo hoo! Going Wide!

Some people have noticed the lack of recent blog posts and commented with concern. Others know to expect a period of silence once I mention that I am about to travel. Some may even be relieved to perhaps have a chance to catch up on some older posts.

I took my new weird two-tone hair look out of the hat and boldly faced the public! I’ve had some twenty-something-year-olds tell me that it is a cool look. I would actually like to keep the two-tone look. It has taken nine months to get to this point and I quite like it! I have also had some weaving friends tell me that they have decided to join me in this cold turkey trip from dyed hair to natural grey.

There’s plenty to tell but I will limit this post to sharing with you what some of my particularly hard-core backstrapper friends did when we spent a weekend together.

We decided to try going wide together.

Everyone wove samples in preparation. Realistic expectations also needed to be set. This weekend was not going to be about weaving the super-wide project of our dreams. It would be about warping, setting up and beginning a project that was significantly wider than the bands that we had previously been weaving together, yet not so wide as to take all weekend just to set up! The new skills could later be transferred to even wider pieces.

Some of the samples that were created before the gathering.

The samples were essential. From those we would take measurements and make calculations for the ”real” project. We had samples in the pick-up structure that we wanted to weave. All except Tracy went with complementary-warp pick-up. Tracy chose a structure that creates warp floats on only one face of the band so that she could replicate some beautiful patterns that are woven into yurt bands in Central Asia. Aunt Lydia’s size 10 and size 3 crochet cotton were the yarns of choice with a beautiful range of colors (there are a lot more colors in size 10 than in the thicker size 3). Tracy again was the exception in that she chose to weave with her hand spun wool. The other required sample was a piece in plain weave.

Tracy’s hand spun wool alongside one of Allen Berry’s gorgeous swords.

Nancy’s ”samples” were awesome in their own right! and enabled us to calculate the number of ends she would need for her project and plan layout.

Nancy was planning a woven cover for her daughter’s journal and it needed to be a precise width. We took measurements from her pebble weave and plain weave samples to calculate the number of ends she needed as well as the layout of the pick-up patterns and areas of plain weave.

Number-crunching with Tara for her wide project calculating warp requirements based on her samples. She planned a length of patterned fabric that could be folded into a box shape.

The wide warps were wound in sections as they were too wide for our warping stakes. I often choose to wind in sections as I don’t like having my warps climb too far up my warping stakes. I have found that even the sturdiest of stakes can lean when they are holding many bouts of yarn. Good, even tension on the warping stakes is critical. These warps will not be cut and threaded through heddles and then re-tensioned as they would be for floor and other kinds of looms. We are basically dressing the loom as we warp and the tension we create while doing so is what we must live with for the life of the project.

Ann removes one of sections from the stakes . She placed each section on loom beams and cross sticks that waited on the floor in another room…out of the way of feet and curious kitties!

Off comes one of Tracy’s sections. Each person decided how large they would make their sections depending on how far they trusted the sturdiness of the warping pegs under their particular warp tension. Some people wind tight warps, others not so much.

Nancy stops to check her count. Her notebook lies nearby with warping plan. There was much chatter and laughter which made me nervous. No one can come anywhere near me when I am warping and I need silence!

I stopped now and then to amuse myself with the cats and take pictures of the projects that the ladies had brought to share.

Above you can see the spindle bag that Tracy made using some of the beautiful pieces of fabric from the Bolivian co-op that we all support. Tracy covered the seams with cross-knit looping stitches and added a round base. On the table you can see a collection of spindles also made by the talented wood-working friend Allen Berry.

This is the band that Ann had been weaving the last time I saw her. She used my favorite leaf motif in spring-to-fall colors.

And here are some lanyards for name tags woven by Tara and Nancy. They combined patterns that had been woven into Bolivian bands that they own.

Lanyards in cotton and tencel made by Nancy and Tara.

Here are more amazing swords by Allen Berry. The ladies knew that they would need longer swords for their wide projects and Allen Berry created these. Each has its own unique pattern. You can view his products via his allenrberry Instagram account and make direct contact with him there.

Tracy was using this shoulder bag. I had last seen this as fabric on the loom made from Tracy’s own handspun wool a year ago. It was great to see the finished product with its eye-pattern tubular edging and strap. It feels gorgeous!

And, as I photographed all these beautiful projects and played with the cats, completed warps started appearing!

Phew! The warps are on the looms and they look great! Now to make heddles.

Tracy’s hand spun wool is even more stunning all stretched out like this!

Aunt Lydia’s size 10 crochet cotton has some bold and beautiful colors and Ann has combined them so nicely.

Stacy starts her heddles on a beautiful red, black and white piece for which she planned a knot-work pattern in pebble weave….

Some moments of hush while heddles are made. It’s funny because that is the part of the process when I can actually talk to people. These ladies, on the other hand, got very quiet during this part.

Tara’s warp with heddles in place. She included some sparkles in the warp which unfortunately don’t show up in the picture. This piece will be for her daughter. It is beautifully tensioned…so exciting to see a fresh warp on the loom!

Are we done yet? Getting there slowly with the heddles!

Stuff happens when big projects like these are warped and set up. I won’t say that every warp came off the stakes ready to roll. Some threads had to be removed when the count was wrong. Some threads needed a little adjustment for uneven tension. That’s all to be expected. I remember sitting with my teacher in Ecuador and learning how to wind a dove-tailed warp for a hammock while her family watched. She made three errors in the warping and how she laughed and laughed when she discovered them. Everyone joined in! Maybe it’s not so funny when you are on your own but we were all there to help each other. With my Bolivian teacher we chatted as we rolled the balls of yarn back and forth to each other as we warped. Only when we finished we discovered that the stripes we had warped were totally asymmetric. Hilda laughed it off but I was determined to fix it!

Consulting with Nancy above as she throws her first passes of weft.

Tracy is counting out her first row of pick-up. The first row is critical as all other rows will be picked relative to that foundation. It’s always a relief to get that first row and in and confirm with subsequent rows that all is well.

Getting each and every warp end settled in its place at the very base of the warp is something I like to do. Tara shares my feelings about this and is using a pointed stick to separate the ends and create as neat a start as possible. In some projects this selvedge will end up hidden in a seam and this much attention to neatness may not be necessary.

Classic Andean hooks start to appear in Ann’s turquoise beauty … with another Allen Berry sword.

Nancy’s journal cover will include bee and hive motifs among others. She wove in her daughter’s initials in supplementary weft using lettering of her own design while I was there. You can just make out part of the lettering in progress below her right hand.

Margarite was not part of this group of friends but she did show me this weaving when I visited with her. She had started it back in the 1970’s when she was learning Guatemalan-style patterning. It had the two patterning sticks in place that I know well and we were able to set it up to finish off the motif she had started working on all those years ago. I was able to show her how to continue and put the pattern sticks to good use for creating other motifs. This is one of my favorite things to do…reviving a long forgotten warp that has been languishing in some dark corner unfinished. This one is between forty and fifty years old!

Let me leave you with an important announcement about Patternfish, home of my e-books….

IMPORTANT ANNOUNCEMENT: Some of you may have heard about the fact that Patternfish.com that hosts my ebooks is planning on closing at the end of May. Patterns, e-books etc that you have bought along with any accompanying videos will be available for downloading and saving until the END OF JUNE and I urge you to do so. I will be making a separate blog post about this in the near future once I have investigated my options. In the meantime, if you have concerns about your ability to save your purchases, please contact me via a comment on this blog post or via private message on Facebook or Ravelry. I have an awesome team of customers who have been willing to provide technical help to those who may be having trouble downloading or finding places to store their purchases. Let’s work through this together. We have two months to get your purchases safely tucked away. It’s sad news. Patternfish has been a wonderful home for my ebooks but it’s time to move on and new things are coming!

Backstrap Weaving – Sewing and Warping

A bag in Intermesh structure with a shaped and edged flap. It includes some patterning in weft substitution.

I always get a bit nervous when my weaving friends who are skilled at sewing start picking up my weavings, many of which have been sewn into bags and small pouches. It’s when they start un-zipping, looking inside and inspecting seams that I get all wriggly. I am not great at sewing. My things hold together and look nice on the outside. However, I always fear that the inside might look a little unconventional to those who know something about sewing!

I sew by hand and I have to admit that I find sewing really relaxing. I love to put on a good movie and just sit and sew. Learning to make clothes is kind of a bucket-list thing. I always joke about one day being the best-dressed 79-year old you have ever seen.

Several of my weaving friends have kindly offered to help me make my first item of clothing. One of these days I will take advantage of those offers.

I dream of being able to find a pattern that works just right for me and then go to store knowing something about all that gorgeous fabric. I’ll be able to choose the right kind for the project I have in mind and a print that takes my fancy.

In the meantime, I’ll weave the fabric and sew my bags and pouches.

The fabric that was most recently on my loom was meant to be made into a bag. The black one you see above, which I named Tales from the Sub-continent and Beyond, has been traveling with me for a few years now and really isn’t quite big enough for the stuff I’d like to carry about when I am on the road.

To be honest, the final product is never of great importance to me. My main objective for this project was to weave something that included one of the little pockets that my Bolivian teachers weave into their coca-leaf bags. They are usually tiny pockets just big enough to to insert two or maybe three fingers. I wanted to have a large-ish bag with a pocket big enough to perhaps hold a folded boarding pass, baggage receipts and other bits and pieces that I need to have on hand when I travel.

Weaving that large pocket into this large project was really what this project was all about.

A bag I made for my sister-in-law in 8/2 cotton with Andean Pebble Weave patterns.

Once I had completed the pocket section of the bag, there was nothing new or challenging about the project and it was just a matter of weaving, weaving , weaving….until I decided right at the end that I needed to place the two weaving ladies under a tree.

Out came the charting paper and just I dove in and wove the tree without first sampling as I usually do. I am thinking that if I had wound a warp to first sample the pattern I would still be adjusting the charting and fiddling around with it today! I am quite happy with my tree. If I use it again in another project, I would make some small adjustments. In any case, designing and adding the tree to the project gave it just that extra bit of challenge that I enjoy.

I was determined to make it work because un-weaving wool is not fun. The hairy weft makes itself very much at home next to its hairy warp companions and does not want to be removed! I had already had enough experience un-weaving this wool at the start of this project when I decided that the green stripes I had included in the warp had to go.

Almost at the end with the ladies waiting for their tree.

I had seen this tree picture shared on Facebook and tried to follow it back to its source. Unfortunately, it seems that the photographer’s name was never mentioned. I was quite taken with this grand tree shading all those people and wanted to include something like it in my project.

So, here are the ladies sitting and weaving and chatting under their tree. The bones for the weaver pattern were created by Maja, my online weaving friend in Germany. She allowed me to include her pattern in my Complementary-warp Pattern Book . She was also fine with my making adjustments to it so that I could have two versions in my book. This is my tweaked version. I doubled it and added the tree.

I was so happy with the tree pattern, that the pocket kind of took a back seat for a while.

Then I edged the pocket with the eye-pattern tubular band that I teach in one of my more recent books.

I doubled the thread so that the tubular band would stand out a bit more and added an extra edge thread to each side of the warp so there would be more solid blue in the tube right next to the pebbles. It looks nice enough in this picture but I have since unpicked it all! It just seemed too busy next to the pebbles. I realized that I usually sew these patterned tubular bands onto a solid-color edge. I’ll probably end up attaching a solid-color tubular band instead or some other variation that has more solid color than pattern. The addition of tube was lovely all around the edge. It really strengthened the pocket.

I wove a couple of bands to make the sides of the bag. This comes even after having asked for bag construction ideas in one of the online groups and being given the very wise advice to hand this off to someone who knows what they are doing! However, being someone who is always more interested in the process than the product, I decided that I would push ahead and see what I could come up with on my own. I think that in the end, I would rather have something, even though it may be quite clunky, that I have made myself. It’s a shame that I don’t have enough of the blue yarn left to make the straps.

The sides will be edged with a patterned tubular band which should look nice against all that solid blue. The`straps, once I get the yarn to weave them, will flank the central pattern and go all the way around the bottom of the bag.

In between periods of sewing, I have been in a warp-winding frenzy preparing for up-coming travels. My living room is a yarn jungle. And, with warping very much on my mind and with memories of my online encounter with Megan and Li backstrap weaving which I wrote about in a recent post, a wonderful video came to my attention. Created by Yan Zhang, this is the most beautiful film of backstrap weaving I have seen. It shows the backstrap weaving style used by the weavers of the Li minority group in China. Yan Zhang is the younger lady that you will see in this video winding a warp and then later sitting at the loom and weaving.

This is the first time that I have seen a warp for the backstrap loom wound this way. I contacted Yan Zhang so that I could be sure that I understood what she was doing. I will show a screen shot here of the warping frame to further entice you to click on the video and watch it. In her reply Yan Zhang told me that “this frame is one of the most traditional tools of Li Brocade with 3000 years of history“. I have certainly never seen a warp wound this way before.

I like watching this video last thing at night so that I can close my eyes with the music still playing in my head. (ETA…unfortunately,it appears that the video has been removed from Youtube).

I haven’t been so excited about seeing a warp being prepared since I found this picture of two ladies preparing a backstrap loom from the website of Woven Souls. Jaina Mishra allowed me to share her image of the two ladies warping directly onto the loom.

Weavers in Arunachal Pradesh using the traditional back strap loom to weave skirts, shawls and loin cloths.

And then there was the thrill of winding a warp with Montagnard weaver Ju Nie. With Ju Nie I learned how to create the heddles as the warp is wound (as well as use the wonderful coil rod).

Ju was kind enough to let me try warping. I would never let anyone touch my warp!! She however, took control of the heddle string at each pass but I was slowly coming to understand what was going on.

Oh my gosh, there are so many exciting things still to learn and experience on this continent where I live. I am so grateful that while I am here I am still am able to enjoy these small amounts of contact with weavers from the other side of the world.

I hope that if nothing else grabs your attention in this post, that you will at least pause and watch Yan Zhang’s beautiful film. It is just over 5 minutes long.

I’ll leave you with a reminder, if I may, of my two latest publications….

The Eye-pattern Tubular Band.

Andean Pebble Weave on Inkle Looms.